From: Irfan Siddiqui (Irfan.Siddiqui@vanco.co.uk)
Date: Sun Oct 14 2007 - 16:50:24 ART
Dear all
... one thing ive noticed.. the gatway gets the ip address from dhcp
but then after every 2 minutes it keeps disappearing... and then
reappearing...
also note the error message i keep getting below.. (in red)
one other thing the E1 link is currenlty not up.. but i dont think that
needs to be up for the Gateway to be registered to CCM ??
CCIEVOICE6500> (enable) sh port 4/1
* = Configured MAC Address
Port Name Status Vlan Duplex Speed Type
----- -------------------- ---------- ---------- ------ -----
------------
4/1 POD11-PSTN-T1 enabled 240 full - unknown
Port DHCP MAC-Address IP-Address Subnet-Mask
-------- ------- ----------------- --------------- ---------------
4/1 enable 00-19-aa-f5-1c-8a (Failed to obtain port interface
information)
Port Call-Manager(s) DHCP-Server TFTP-Server Gateway
-------- ----------------- --------------- ---------------
---------------
4/1 - 10.4.200.21 10.4.200.21 10.4.200.3
Port DNS-Server(s) Domain
-------- -----------------
-------------------------------------------------
4/1 - -
Port CallManagerState DSP-Type
-------- ---------------- --------
4/1 notregistered C549
CCIEVOICE6500> (enable) sh port 4/1
* = Configured MAC Address
Port Name Status Vlan Duplex Speed Type
----- -------------------- ---------- ---------- ------ -----
------------
4/1 POD11-PSTN-T1 enabled 240 full - unknown
Port DHCP MAC-Address IP-Address Subnet-Mask
-------- ------- ----------------- --------------- ---------------
4/1 enable 00-19-aa-f5-1c-8a 10.4.200.122 255.255.255.0
Port Call-Manager(s) DHCP-Server TFTP-Server Gateway
-------- ----------------- --------------- ---------------
---------------
4/1 - 10.4.200.21 10.4.200.21 10.4.200.3
Port DNS-Server(s) Domain
-------- -----------------
-------------------------------------------------
4/1 - -
Port CallManagerState DSP-Type
-------- ---------------- --------
4/1 notregistered C549
Port NoiseRegen NonLinearProcessing
--More--2007 Oct 14 07:34:04 EDT -04:00 %SYS-4-MODHPRESET:Host process
(860) 4/3 got reset asynchronously
----- ---------- -------------------
4/1 - -
Port Trap IfIndex
----- -------- -------
4/1 disabled 12
Port Status ErrDisable Reason Port ErrDisableTimeout Action on Timeout
---- ---------- ------------------- ----------------------
-----------------
4/1 enabled - Enable No Change
Idle Detection
--------------
--CCIEVOICE6500> (enable) sh port 4/1
* = Configured MAC Address
Port Name Status Vlan Duplex Speed Type
----- -------------------- ---------- ---------- ------ ----- ------------
4/1 POD11-PSTN-T1 enabled 240 full - unknown
Port DHCP MAC-Address IP-Address Subnet-Mask
-------- ------- ----------------- --------------- ---------------
4/1 enable 00-19-aa-f5-1c-8a (Failed to obtain port interface information)
Port Call-Manager(s) DHCP-Server TFTP-Server Gateway
-------- ----------------- --------------- --------------- ---------------
4/1 - 10.4.200.21 10.4.200.21 10.4.200.3
Port DNS-Server(s) Domain
-------- ----------------- -------------------------------------------------
4/1 - -
Port CallManagerState DSP-Type
-------- ---------------- --------
4/1 notregistered C549
Port NoiseRegen NonLinearProcessing
----- ---------- -------------------
4/1 - -
Port Trap IfIndex
----- -------- -------
4/1 disabled 12
Port Status ErrDisable Reason Port ErrDisableTimeout Action on Timeout
---- ---------- ------------------- ---------------------- -----------------
4/1 enabled - Enable No Change
Idle Detection
--------------
--
********************************************************************** Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files transmitted with it are confidential and solely for the use of the intended recipient. If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any dissemination, distribution, copying or use is strictly prohibited.
If you have received this email in error, or if you are concerned with the content of this email please e-mail to: e-security.support@vanco.info
The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening any attachments to this e-mail.
Vanco UK Ltd Registered in England No: 2296733 Registered Office: John Busch House, 277 London Road, Isleworth, Middlesex TW7 5AX
Please consider the environment before printing this e-mail **********************************************************************
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:14 ART