From: Mark Snow (msnow@ipexpert.com)
Date: Tue Oct 16 2007 - 22:26:35 ART
E1 crossover is the same as a T1 crossover but I'm not sure if I was
clear enough - let me expound.
pstn ph BR1
| /
HQ ---- PSTN--
\
BR2
So use a 4th router (even a 2600xm will work) as your PSTN simulator
running CME with an ip phone hanging off of it.
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: msnow@ipexpert.com
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On
Demand and Audio Certification Training Tools for the Cisco CCIE R&S
Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab
and CCIE Storage Lab Certifications.
On Oct 16, 2007, at 9:11 PM, Radioactive Frog wrote:
> Hi Mark,
> Thanks for the tip but how I am going to use the E1 port in that
> case? I have bought the gears with E1 ports (expensive though).
>
> I have 2 port E1T1 Vwic2 module on my HO router and 1xe1t1 vwic2
> port on each BR1 and BR2 router.
>
> Can I connect them using a E1 crossover cable (Br1 to HQ and BR2 to
> HQ) and run CME on HO router?
>
> The bottom line is "what feature I won't be able to do" if I do
> above? e.g. ANI/DNIS featuer? some troubleshooting stuffs?
>
> Appreciate if you can give me some hints or working configuration
> example.
>
>
> Frog
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:15 ART