From: Mark Snow (msnow@ipexpert.com)
Date: Tue Oct 16 2007 - 22:15:14 ART
Hey J P,
Also - we have posted our PSTN configs over at our proctorlabs
support forum.
They have been there for a few years now - I believe that they are up
to date and recently posted - but I will check to make sure and if
for some reason they are older - will update them.
Cheers,
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: msnow@ipexpert.com
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On
Demand and Audio Certification Training Tools for the Cisco CCIE R&S
Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab
and CCIE Storage Lab Certifications.
On Oct 16, 2007, at 5:10 PM, Irfan Siddiqui wrote:
> Dear All
>
>
>
> I am working on Ipexpert voice Section 4 - Gateway lab and I cant
> get my
> PSTN links up. Please help as im stuck.
>
>
>
> I have attached the config for my PSTN switch, Branch 1 and branch 2 ,
> none of my PSTN links are coming up,
>
>
>
> I have T1 on BR1 and E1 on BR2 and HQ.
>
>
>
> Can someone please help me with the PSTN issue...
>
>
>
> One other thing I fail to understand why Ipexpert cannot provide its
> customers with Base configs ie PSTN config
>
>
>
> Thanks in advance
>
>
>
> Regards
>
> JP Singh
>
>
>
> **********************************************************************
> Any opinions expressed in the email are those of the individual and
> not
> necessarily the company. This email and any files transmitted with
> it are
> confidential and solely for the use of the intended recipient. If
> you are not
> the intended recipient or the person responsible for delivering it
> to the
> intended recipient, be advised that you have received this email in
> error and
> that any dissemination, distribution, copying or use is strictly
> prohibited.
>
> If you have received this email in error, or if you are concerned
> with the
> content of this email please e-mail to: e-security.support@vanco.info
>
> The contents of an attachment to this e-mail may contain software
> viruses
> which could damage your own computer system. While the sender has
> taken every
> reasonable precaution to minimise this risk, we cannot accept
> liability for
> any damage which you sustain as a result of software viruses. You
> should carry
> out your own virus checks before opening any attachments to this e-
> mail.
>
> Vanco UK Ltd Registered in England No: 2296733 Registered Office:
> John Busch
> House, 277 London Road, Isleworth, Middlesex TW7 5AX
>
> Please consider the environment before printing this e-mail
> **********************************************************************
> Building configuration...
>
> Current configuration : 1359 bytes
> !
> version 12.4
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname PSTN_WAN
> !
> boot-start-marker
> boot-end-marker
> !
> card type e1 0 2
> card type t1 0 3
> !
> no aaa new-model
> !
> resource policy
> !
> network-clock-participate wic 2
> network-clock-participate wic 3
> ip subnet-zero
>
> !
> ip cef
> !
> !
> !
> isdn switch-type primary-ni
> !
> voice-card 0
> no dspfarm
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
>
> !
> !
> controller E1 0/2/0
> clock source internal
> pri-group timeslots 1-3,16
> !
> controller E1 0/2/1
> !
> controller T1 0/3/0
> framing esf
> clock source internal
> linecode b8zs
> pri-group timeslots 1-3,24
> !
> controller T1 0/3/1
> framing esf
> linecode b8zs
> !
> !
> !
> !
> interface FastEthernet0/0
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface Serial0/2/0:15
> no ip address
> isdn switch-type primary-net5
> isdn incoming-voice voice
> no cdp enable
> !
> interface Serial0/3/0:23
> no ip address
> isdn switch-type primary-ni
> isdn protocol-emulate network
> isdn incoming-voice voice
> no cdp enable
> !
> ip classless
> !
> !
> ip http server
> no ip http secure-server
> !
> !
> !
> !
> !
> control-plane
> !
> !
> !
> voice-port 0/3/0:23
> !
> voice-port 0/2/0:15
> !
> !
> !
> !
> --More--
> !
> !
> !
> gatekeeper
> shutdown
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> login
> !
> scheduler allocate 20000 1000
> !
> end
>
> PSTN_WAN# sh isdn status
> Global ISDN Switchtype = primary-ni
> ISDN Serial0/3/0:23 interface
> ******* Network side configuration *******
> dsl 0, interface ISDN Switchtype = primary-ni
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 0, Ces = 1, SAPI = 0, State = AWAITING_ESTABLISHMENT
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Active dsl 0 CCBs = 0
> The Free Channel Mask: 0x80000007
> Number of L2 Discards = 0, L2 Session ID = 151
> ISDN Serial0/2/0:15 interface
> dsl 1, interface ISDN Switchtype = primary-net5
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Active dsl 1 CCBs = 0
> The Free Channel Mask: 0x80000007
> Number of L2 Discards = 0, L2 Session ID = 140
> Total Allocated ISDN CCBs = 0
> PSTN_WAN#sh contr
> PSTN_WAN#sh controllers e1 0/2/0
> E1 0/2/0 is up.
> Applique type is Channelized E1 - balanced
> No alarms detected.
> alarm-trigger is not set
> Version info Firmware: 20060707, FPGA: 13, spm_count = 0
> Framing is CRC4, Line Code is HDB3, Clock Source is Internal.
> CRC Threshold is 320. Reported from firmware is 320.
> Data in current interval (524 seconds elapsed):
> 0 Line Code Violations, 0 Path Code Violations
> 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0
> Unavail Secs
> Data in Interval 1:
> 0 Line Code Violations, 0 Path Code Violations
> 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0
> Unavail Secs
> Data in Interval 2:
> 0 Line Code Violations, 0 Path Code Violations
> 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0
> Unavail Secs
> Data in Interval 3:
> 0 Line Code Violations, 0 Path Code Violations
> 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0
> Unavail Secs
>
> PSTN_WAN#sh controllers t1 0/3/0
> T1 0/3/0 is up.
> Applique type is Channelized T1
> Cablelength is long gain36 0db
> No alarms detected.
> alarm-trigger is not set
> Soaking time: 3, Clearance time: 10
> AIS State:Clear LOS State:Clear LOF State:Clear
> Version info Firmware: 20060707, FPGA: 13, spm_count = 0
> Framing is ESF, Line Code is B8ZS, Clock Source is Internal.
> CRC Threshold is 320. Reported from firmware is 320.
> Data in current interval (537 seconds elapsed):
> 0 Line Code Violations, 0 Path Code Violations
> 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0
> Unavail Secs
> Data in Interval 1:
> 0 Line Code Violations, 0 Path Code Violations
> 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0
> Unavail Secs
> Data in Interval 2:
> 0 Line Code Violations, 0 Path Code Violations
> 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0
> Unavail Secs
> Data in Interval 3:
> --More--
> PSTN_WAN#u
> BR1-RTR#sh isdn status
> Global ISDN Switchtype = primary-ni
>
> %Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 1. Layer 3 output
> may not apply
>
> ISDN Serial0/1/0:23 interface
> dsl 1, interface ISDN Switchtype = primary-ni
> L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Active dsl 1 CCBs = 0
> The Free Channel Mask: 0x80000007
> Number of L2 Discards = 0, L2 Session ID = 2
> Total Allocated ISDN CCBs = 0
> BR1-RTR#
> BR1-RTR#
> BR1-RTR#sh runn
> Building configuration...
>
> Current configuration : 3500 bytes
> !
> ! Last configuration change at 20:11:54 edt Tue Oct 16 2007 by cisco
> ! NVRAM config last updated at 11:46:50 edt Tue Oct 16 2007 by cisco
> !
> version 12.4
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname BR1-RTR
> !
> boot-start-marker
> boot-end-marker
> !
> card type t1 0 1
> logging buffered 51200 warnings
> enable secret 5 $1$Y2JP$847ZRa95fZTBkyoNpXXen0
> !
> no aaa new-model
> !
> resource policy
>
> clock timezone est -5
> clock summer-time edt recurring
> network-clock-participate wic 1
> ip subnet-zero
> !
> !
> ip cef
> !
> !
> ip domain name yourdomain.com
> !
> isdn switch-type primary-ni
> !
> voice-card 0
> dspfarm
> dsp services dspfarm
> !
> !
> !
> !
> !
>
> !
> !
> !
> !
> !
> !
> !
> username cisco password 0 cisco
> !
> !
> controller T1 0/1/0
> framing esf
> linecode b8zs
> pri-group timeslots 1-3,24 service mgcp
> !
> controller T1 0/1/1
> framing esf
> linecode b8zs
> !
> !
> !
> !
> interface Loopback0
> ip address 172.4.101.1 255.255.255.0
> ip ospf network point-to-point
> !
> interface FastEthernet0/0
> description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0/0$
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface Serial0/0/0
> no ip address
> encapsulation frame-relay IETF
> no fair-queue
> frame-relay lmi-type ansi
> --More-- !
> interface Serial0/0/0.1 point-to-point
> ip address 162.4.101.2 255.255.255.0
> ip ospf mtu-ignore
> frame-relay interface-dlci 101
> !
> interface Serial0/1/0:23
> no ip address
> isdn switch-type primary-ni
> isdn incoming-voice voice
> isdn bind-l3 ccm-manager
> no cdp enable
> !
> interface FastEthernet1/0
> switchport trunk native vlan 140
> switchport mode trunk
> switchport voice vlan 240
> !
> interface FastEthernet1/1
> !
> interface FastEthernet1/2
> shutdown
> !interface FastEthernet1/3
> shutdown
> !
> interface FastEthernet1/4
> shutdown
> !
> interface FastEthernet1/5
> shutdown
> !
> interface FastEthernet1/6
> shutdown
> !
> interface FastEthernet1/7
> shutdown
> !
> interface FastEthernet1/8
> shutdown
> !
> interface FastEthernet1/9
> shutdown
> !
> interface FastEthernet1/10
> switchport trunk native vlan 140
> switchport mode trunk
> switchport voice vlan 240
> !
> interface FastEthernet1/11
> shutdown
> !
> interface FastEthernet1/12
> shutdown
> !
> interface FastEthernet1/13
> shutdown
> !
> interface FastEthernet1/14
> shutdown
> !
> interface FastEthernet1/15
> shutdown
> !
> interface Vlan1
> no ip address
> shutdown
> !
> interface Vlan240
> ip address 10.4.201.1 255.255.255.0
> ip helper-address 10.4.200.21
> !
> router ospf 1
> router-id 172.4.101.1
> log-adjacency-changes
> network 10.4.201.0 0.0.0.255 area 0
> network 162.4.101.0 0.0.0.255 area 0
> network 172.4.101.0 0.0.0.255 area 0
> !
> ip classless
> !
> !
> ip http server
> ip http access-class 23
> ip http authentication local
> no ip http secure-server
> ip http timeout-policy idle 60 life 86400 requests 10000
> !
> !
> !
> !
> !
> control-plane
> !
> !
> !
> voice-port 0/1/0:23
> !
> ccm-manager mgcp
> !
> mgcp
> mgcp call-agent 10.4.200.21 service-type mgcp version 0.1
> mgcp dtmf-relay voip codec all mode out-of-band
> mgcp bind control source-interface Vlan240
> mgcp bind media source-interface Vlan240
> !
> mgcp profile default
> !
> !
> !
> dial-peer voice 1 pots
> service mgcpapp
> port 0/1/0:23
> !
> !
> --More-- !
> !
> gatekeeper
> shutdown
> !
> !
> line con 0
> login local
> line aux 0
> line vty 0 4
> access-class 23 in
> privilege level 15
> login local
> transport input telnet ssh
> line vty 5 15
> access-class 23 in
> privilege level 15
> login local
> transport input telnet ssh
> !
> scheduler allocate 20000 1000
> ntp clock-period 17179989
> ntp server 10.4.200.3
> --More-- !
> end
> BR2-RTR#sh runn
> Building configuration...
>
> Current configuration : 5493 bytes
> !
> ! Last configuration change at 20:38:12 edt Tue Oct 16 2007 by cisco
> ! NVRAM config last updated at 20:38:13 edt Tue Oct 16 2007 by cisco
> !
> version 12.4
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname BR2-RTR
> !
> boot-start-marker
> boot-end-marker
> !
> card type e1 0 0
> ! card type command needed for slot/vwic-slot 0/3
> logging buffered 51200 warnings
> enable secret 5 $1$QV1t$IR5/yJLcfNWjDv7dBR3cC0
> !
> no aaa new-model
> !
> --More-- resource policy
> !
> clock timezone est -5
> clock summer-time edt recurring
> network-clock-participate wic 0
> ip subnet-zero
> !
> !
> ip cef
> no ip dhcp use vrf connected
> ip dhcp excluded-address 10.4.202.1 10.4.202.119
> ip dhcp excluded-address 10.4.202.130 10.4.202.254
> !
> ip dhcp pool br2
> network 10.4.202.0 255.255.255.0
> default-router 10.4.202.1
> option 150 ip 10.4.202.1
> !
> !
> no ip domain lookup
> ip domain name yourdomain.com
> !
> isdn switch-type primary-net5
> --More-- !
> voice-card 0
> dspfarm
> dsp services dspfarm
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> username cisco password 0 cisco
> !
> !
> controller E1 0/0/0
> ds0-group 1 timeslots 1-3 type r2-digital r2-semi-compelled ani
> cas-custom 1
> dnis-digits min 3 max 11
> !
> controller E1 0/0/1
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 172.4.102.1 255.255.255.255
> ip ospf network point-to-point
> !
> interface FastEthernet0/0
> description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0/0$
> no ip address
> duplex auto
> speed auto
> !
> interface FastEthernet0/0.140
> encapsulation dot1Q 140 native
> no snmp trap link-status
> !
> interface FastEthernet0/0.240
> encapsulation dot1Q 240
> ip address 10.4.202.1 255.255.255.0
> no snmp trap link-status
> !
> interface Service-Engine0/0
> no ip address
> shutdown
> !
> interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface Serial0/1/0
> no ip address
> encapsulation frame-relay IETF
> no fair-queue
> frame-relay lmi-type ansi
> !
> interface Serial0/1/0.1 point-to-point
> ip address 162.4.102.2 255.255.255.0
> frame-relay interface-dlci 102
> !
> router ospf 1
> log-adjacency-changes
> network 10.4.202.0 0.0.0.255 area 0
> network 162.4.102.0 0.0.0.255 area 0
> network 172.4.102.0 0.0.0.255 area 0
> !
> ip classless
> !
> !
> ip http server
> ip http access-class 23
> ip http authentication local
> no ip http secure-server
> ip http timeout-policy idle 60 life 86400 requests 10000
> ip http path flash:
> !
> !
> !
> !
> !
> control-plane
>
> !
> !
> voice-port 0/0/0:1
> !
> !
> !
> sccp local FastEthernet0/0.240
> sccp ccm 10.4.202.1 identifier 1
> sccp
> !
> sccp ccm group 1
> associate ccm 1 priority 1
> associate profile 1 register mtp001c58bb3448
> !
> dspfarm profile 1 transcode
> codec g711ulaw
> codec g711alaw
> codec g729ar8
> codec g729abr8
> codec gsmfr
> codec g729r8
> maximum sessions 6
> associate application SCCP
> shutdown
> !
> dial-peer cor custom
> name pt-911
> name pt-loc
> name pt-ld
> name pt-int
> !
> !
> dial-peer cor list css-911
> member pt-911
> !
> dial-peer cor list css-loc
> member pt-loc
> !
> dial-peer cor list css-ld
> member pt-ld
> !
> dial-peer cor list css-int
> member pt-int
> !
> dial-peer cor list css-911-loc
> member pt-911
> member pt-loc
> !
> dial-peer cor list css-all
> member pt-911
> member pt-loc
> member pt-ld
> member pt-int
> !
> !
> dial-peer voice 911 pots
> corlist outgoing css-911
> !
> dial-peer voice 1 pots
> corlist outgoing css-loc
> !
> dial-peer voice 2 pots
> corlist outgoing css-ld
> !
> dial-peer voice 3 pots
> corlist outgoing css-int
> !
> !
>
> !
> gatekeeper
> shutdown
> !
> !
> telephony-service
> max-ephones 20
> max-dn 48
> ip source-address 10.4.202.1 port 2000
> auto assign 1 to 4
> timeouts interdigit 7
> system message BR2-JPSINGH
> sdspfarm units 1
> sdspfarm transcode sessions 6
> sdspfarm tag 1 mtp001c58bb3448
> network-locale GB
> create cnf-files version-stamp 7960 Oct 13 2007 11:57:46
> dialplan-pattern 1 3313243... extension-length 4
> max-conferences 8 gain -6
> web admin system name cisco password cisco
> dn-webedit
> time-webedit
> --More-- transfer-system full-consult
> after-hours block pattern 1 9011
> after-hours day Sun 23:59 09:00
> after-hours day Mon 17:00 09:00
> after-hours day Tue 17:00 09:00
> after-hours day Wed 17:00 09:00
> after-hours day Thu 17:00 09:00
> after-hours day Fri 17:00 09:00
> after-hours day Sat 09:00 23:59
> !
> !
> ephone-dn 1 dual-line
> number 3001
> corlist incoming css-911-loc
> !
> !
> ephone-dn 2 dual-line
> number 3002
> corlist incoming css-all
> !
> !
> ephone-dn 3 dual-line
> number 3003
> corlist incoming css-all
> !
> !
> ephone-dn 4 dual-line
> number 3004
> !
> !
> ephone-dn 5 dual-line
> number 3010
> huntstop channel
> no huntstop
> !
> !
> ephone-dn 6 dual-line
> number 3010
> preference 1
> huntstop channel
> no huntstop
> !
> !
> ephone-dn 11
> number 1007
> paging ip 239.0.1.20 port 2000
>
> !
> ephone-dn 12
> number 1008
> paging ip 239.0.1.20 port 2000
> !
> !
> ephone-dn 13
> number 1009
> paging ip 239.0.1.20 port 2000
> paging group 11,12
> !
> !
> ephone 1
> mac-address 001B.D460.6FEF
> paging-dn 11
> type 7960
> button 1:1 2c5,6
> !
> !
> !
> ephone 2
> mac-address 001B.D460.6FCF
> paging-dn 12
> type 7960
> button 1:2
> !
> !
> !
> ephone 3
> mac-address 000D.654B.92D7
> type 7960
> button 1:3 2c5,6
> !
> !
> !
> ephone 4
> mac-address 0030.94C2.6C78
> type 7960
> button 1:4
> !
> !
> !
> line con 0
> login local
> line aux 0
> line 194
> no activation-character
> no exec
> transport preferred none
> transport input all
> transport output all
> line vty 0 4
> access-class 23 in
> privilege level 15
> login local
> transport input telnet
> line vty 5 15
> access-class 23 in
> privilege level 15
> login local
> transport input telnet
> !
> warm-reboot
> scheduler allocate 20000 1000
> ntp clock-period 17179811
> ntp server 10.4.200.3
> !
> end
>
> BR2-RTR#
>
> ______________________________________________________________________
> _
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:15 ART