Re: Problem registering the gateway -- please help

From: Tarun Pahuja (pahujat@gmail.com)
Date: Sun Oct 21 2007 - 17:24:14 ART

Frog/Irfan,
        To configure a Non-IOS Mgcp Gateway (6608) Blade please follow:

http://www.ciscopress.com/articles/article.asp?p=420286&seqNum=2

To construct a T1/E1 Crossover cable Please follow:

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b6e0f.shtml

To configure a PSTN gateway Please follow:

http://72.14.235.104/search?q=cache:5wjSlHpMoswJ:www.cisco.com/application/pdf/en/us/guest/products/ps501/c1237/ccmigration_09186a00801e19bd.pdf+cisco+network+user+clock+pri+t1&hl=en&ct=clnk&cd=1&gl=in

Note: When configuring a PSTN gateway please pay close attention to clocking
and Network emulate command. When using a T1/E1 Crossover, you have to
configure one side as network and the other side as user. Also, One side
must provide clocking. You do not loose any functionality using the T1/E1
crossover cable, Works fine with CCS and CAS.

If you are low on budget and can not afford enough DSPs to support a full
T1/E1 on the connecting router , you can always busy out channels on the
6608 port. I am assuming that you have at least one 6608 blade.

For a Non-IOS mgcp gateway such as a 6608 blade, you need only basic
configuration on the gateway ( IP Address, Vlan, Tftp). Most of the
configuration is done on the CallManager since it will be controlling the
gateway.

Once you are comfortable with configuring and using a T1/E1 Crossover, you
can configure one out of the two routers as a Gateway/CCME to emulate PSTN.
The only drawback is that you will not be able to route calls back out of
PSTN.

HTH,
Tarun Pahuja
CCIE#7707(R&S,Security,SP,Voice,Storage),CCSI

On 10/21/07, Scott Morris <swm@emanon.com> wrote:
>
> Which sounds like a much more detailed version of exactly what I said.
>
> There must be something for brevity in my timezone tonite. ;)
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> JNCIE-M
> #153, JNCIS-ER, CISSP, et al.
> CCSI/JNCI-M/JNCI-ER
> VP - Technical Training - IPexpert, Inc.
> IPexpert Sr. Technical Instructor
>
> A Cisco Learning Partner - We Accept Learning Credits!
>
> smorris@ipexpert.com
>
> Telephone: +1.810.326.1444
> Fax: +1.810.454.0130
> http://www.ipexpert.com
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Brian Dennis
> Sent: Saturday, October 20, 2007 11:54 PM
> To: smorris@ipexpert.com; 'Mark Snow'; 'Radioactive Frog'; 'Cisco
> certification'
> Subject: RE: Problem registering the gateway -- please help
>
> Actually you can use the PVDM-12 with an NM-HDV in a 2811 but of course
> the
> 2801 does have an NM slot so it won't work in it.
>
> Router>sho ver | in 2811
> Cisco 2811 (revision 53.51) with 245760K/16384K bytes of memory.
> Router>sho inventory
> NAME: "2811 chassis", DESCR: "2811 chassis"
> PID: CISCO2811 , VID: V03 , SN: FTX1048A4DL
>
> NAME: "Two port E1 voice interface daughtercard on Slot 0 SubSlot 0",
> DESCR: "Two port E1 voice interface daughtercard"
> PID: VWIC-2MFT-E1= , VID: 1.0, SN: 31868125
>
> NAME: "2nd generation two port FXS voice interface daughtercard on Slot 0
> SubSlot 1", DESCR: "2nd generation two port FXS voice interface
> daughtercard"
> PID: VIC2-2FXS , VID: V01 , SN: FOC11253ZMF
>
> NAME: "PVDMII DSP SIMM with Two DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII
> DSP SIMM with Two DSPs"
> PID: PVDM2-32 , VID: NA , SN: FOC09182RHV
>
> NAME: "AIM Service Engine 0", DESCR: "AIM Service Engine"
> PID: AIM-CUE , VID: NA , SN: FOC082428UR
>
> NAME: "High Density Voice on Slot 1", DESCR: "High Density Voice"
> PID: , VID: 1.1, SN: JAE07410S0R
>
> NAME: "E1 (1 Port) Multi-Flex Trunk WAN Daughter Card on Slot 1 SubSlot
> 0",
> DESCR: "E1 (1 Port) Multi-Flex Trunk WAN Daughter Card"
> PID: VWIC-1MFT-E1= , VID: 1.0, SN: 35485311
>
> NAME: "PVDM 3-C549 Simm on Slot 1 SubSlot 1", DESCR: "PVDM 3-C549 Simm"
> PID: PVDM-12= , VID: , SN:
>
> NAME: "PVDM 3-C549 Simm on Slot 1 SubSlot 2", DESCR: "PVDM 3-C549 Simm"
> PID: PVDM-12= , VID: , SN:
>
> NAME: "PVDM 3-C549 Simm on Slot 1 SubSlot 3", DESCR: "PVDM 3-C549 Simm"
> PID: PVDM-12= , VID: , SN:
>
> NAME: "PVDM 3-C549 Simm on Slot 1 SubSlot 4", DESCR: "PVDM 3-C549 Simm"
> PID: PVDM-12= , VID: , SN:
>
>
> Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> >----- Original Message -----
> Subject: RE: Problem registering the gateway -- please help
> Date: Sat, October 20, 2007 20:22
> From: "Scott Morris" <smorris@ipexpert.com>
>
> > Addendum there... I hadn't noticed that an NM-HDV was not on the list.
> > Natively, any of the 28xx routers support just the PVDM2s.
> >
> > Scott
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of Brian Dennis
> > Sent: Saturday, October 20, 2007 11:06 PM
> > To: Mark Snow
> > Cc: Radioactive Frog; Cisco certification
> > Subject: Re: Problem registering the gateway -- please help
> >
> > Mark,
> > Are you sure that the PVDM-12 will work in the 2801? For the
> > 2801 he needs a PVDM2 (i.e. PVDM2-16).
> >
> > Brian Dennis, CCIE4 #2210 (R&amp;S/ISP-Dial/Security/SP)
> > bdennis@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987
> > Direct: 775-745-6404 (Outside the US and Canada)
> >
> > Mark Snow wrote:
> > > Assuming you are only using 3 channels per T1 or E1 (all of our labs
> > > utilize that config) - then yeah this is great.
> > >
> > > Mark Snow
> > > CCIE #14073 (Voice, Security)
> > > CCSI #31583
> > > Senior Technical Instructor - IPexpert, Inc.
> > > A Cisco Learning Partner - We Accept Learning Credits!
> > > Telephone: +1.810.326.1444
> > > Fax: +1.309.413.4097
> > > Mailto: msnow@ipexpert.com
> > >
> > > IPexpert - The Global Leader in Self-Study, Classroom-Based, Video
> > > On Demand and Audio Certification Training Tools for the Cisco CCIE
> > > R&amp;S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE
> > > Voice Lab and CCIE Storage Lab Certifications.
> > >
> > >
> > > On Oct 20, 2007, at 10:23 PM, Radioactive Frog wrote:
> > >
> > >> Thanks marks.
> > >> I worked out the cost effective simulator. 3640 with NM-HDV was
> > >> going to cost more than below solution:
> > >>
> > >> 1 x Cisco 2801 - 1000 USD
> > >> 1 x VWIC-2MFT-T1 - 100 USD
> > >> 1 x VWIC-2MFT-E1- 100 USD
> > >> 2 x PVDM12 - 100 USD
> > >> ------------------------------------------------
> > >> total - 1300 USD
> > >> ------------------------------------------------
> > >>
> > >> Do you see any problem in above BOM ?
> > >>
> > >> Vwic's already ordered. Going to order 2801 if guru's confirm there
> > >> isn't any issue.
> > >>
> > >> Cheers
> > >>
> > >> Frog
> > >
> > > ____________________________________________________________________
> > > ___ Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > ______________________________________________________________________
> > _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:17 ART