From: marc fernandez (mag08036@yahoo.com)
Date: Fri Oct 13 2006 - 23:40:21 ART
I have a 3640 which had no mem or flash and would not
boot. I upgraded it to 128D/32F. Tried to download
flash via xmodem but image still won't load. I now can
only access it via rommon. Does anyone have any
answers in regards to what I am doing wrong or what is
wrong? below is the constant reboot I get after a
reset as there is no image on the box when I do a dir.
I need help desperatly.
rommon 2 > reset
System Bootstrap, Version 11.1(20)AA2, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 131072 Kbytes of main memory
Main memory is configured to 64 bit mode with parity
disabled
program load complete, entry point: 0x80008000, size:
0x1a7a6f8
Self decompressing the image :
Error : Uncompression of the image failed.
invalid compressed data--format violated
Error : zip decompress failed
*** System received a Software forced crash ***
signal= 0x17, code= 0x7, context= 0x8000eb40
PC = 0x800080d4, Cause = 0x20, Status Reg = 0x3041f003
System Bootstrap, Version 11.1(20)AA2, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 131072 Kbytes of main memory
Main memory is configured to 64 bit mode with parity
disabled
PCMCIA Slot0: No Card Present
System Bootstrap, Version 11.1(20)AA2, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
-marc
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART