From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Sat Oct 14 2006 - 00:09:46 ART
Paste that information in the Cisco Output interpreter
https://www.cisco.com/pcgi-bin/Support/OutputInterpreter/home.pl
ERROR: A 'Software-forced Crash' error occurs when the router detects a
severe, unrecoverable error, and reloads itself to prevent transmission of
corrupt data.
This error may be caused by watchdog timeouts, low memory, corrupt software
image,or hardware problems.
TRY THIS: (please note that there are URLs in the following text, so go to
OInterpreter Page to check out detail information)
1. Please refer to TAC Case Collection - Software-forced crash for
troubleshooting.
2. If the "Error : pre and post compression image sizes disagree" console
message is displayed along with 'Software forced crash' message, please
refer
to TAC Case Collection - Software-forced crash (pre and post compression)
for
troubleshooting.
3. If the "Not enough memory in the system to run this image" console
message is displayed along with the 'Software-forced Crash' message,
please refer
to TAC Case Collection - Software-forced crash (not enough memory) for
troubleshooting.
REFERENCE: For more information, see Understanding Software-forced Crashes.
REFERENCE: For more information, see:
Troubleshooting Router Crashes
Less Common Types of System Crashes
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de marc
fernandez
Enviado el: Viernes, 13 de Octubre de 2006 10:40 p.m.
Para: ccielab@groupstudy.com
Asunto: 3640 will not load image
I have a 3640 which had no mem or flash and would not
boot. I upgraded it to 128D/32F. Tried to download
flash via xmodem but image still won't load. I now can
only access it via rommon. Does anyone have any
answers in regards to what I am doing wrong or what is
wrong? below is the constant reboot I get after a
reset as there is no image on the box when I do a dir.
I need help desperatly.
rommon 2 > reset
System Bootstrap, Version 11.1(20)AA2, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 131072 Kbytes of main memory
Main memory is configured to 64 bit mode with parity
disabled
program load complete, entry point: 0x80008000, size:
0x1a7a6f8
Self decompressing the image :
Error : Uncompression of the image failed.
invalid compressed data--format violated
Error : zip decompress failed
*** System received a Software forced crash ***
signal= 0x17, code= 0x7, context= 0x8000eb40
PC = 0x800080d4, Cause = 0x20, Status Reg = 0x3041f003
System Bootstrap, Version 11.1(20)AA2, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 131072 Kbytes of main memory
Main memory is configured to 64 bit mode with parity
disabled
PCMCIA Slot0: No Card Present
System Bootstrap, Version 11.1(20)AA2, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
-marc
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART