From: Brad Ellis (brad@ccbootcamp.com)
Date: Sat Oct 14 2006 - 01:37:48 ART
I've seen this before...try the following:
1) re-download a very small ip only 3640 image and try that
if (1) doesnt work, then (2) try replacing the dram and try the upgrade
again
if (2) doesnt work, then (3) try replacing the flash (although it doesnt
appear to be a flash issue)
thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI#30482
Network Learning Inc - A Cisco Sponsored Organization (SO)
YES! We take Cisco Learning credits!
brad@ccbootcamp.com
www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
Voice: 702-968-5100
FAX: 702-446-8012
----- Original Message -----
From: "marc fernandez" <mag08036@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Friday, October 13, 2006 7:40 PM
Subject: 3640 will not load image [bcc][faked-from]
>I have a 3640 which had no mem or flash and would not
> boot. I upgraded it to 128D/32F. Tried to download
> flash via xmodem but image still won't load. I now can
> only access it via rommon. Does anyone have any
> answers in regards to what I am doing wrong or what is
> wrong? below is the constant reboot I get after a
> reset as there is no image on the box when I do a dir.
> I need help desperatly.
>
> rommon 2 > reset
>
> System Bootstrap, Version 11.1(20)AA2, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> C3600 processor with 131072 Kbytes of main memory
> Main memory is configured to 64 bit mode with parity
> disabled
>
> program load complete, entry point: 0x80008000, size:
> 0x1a7a6f8
> Self decompressing the image :
> Error : Uncompression of the image failed.
> invalid compressed data--format violated
>
> Error : zip decompress failed
>
> *** System received a Software forced crash ***
> signal= 0x17, code= 0x7, context= 0x8000eb40
> PC = 0x800080d4, Cause = 0x20, Status Reg = 0x3041f003
>
> System Bootstrap, Version 11.1(20)AA2, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> C3600 processor with 131072 Kbytes of main memory
> Main memory is configured to 64 bit mode with parity
> disabled
>
> PCMCIA Slot0: No Card Present
>
> System Bootstrap, Version 11.1(20)AA2, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
>
>
>
> -marc
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART