From: marc fernandez (mag08036@yahoo.com)
Date: Sat Oct 14 2006 - 13:37:38 ART
Tried all of the steps below. Including output
interpretor but I'm still getting the following error
after image download. Any comments or ideas on what to
do?
Error : Uncompression of the image failed.
invalid compressed data--format violated
Error : zip decompress failed
*** System received a Software forced crash ***
signal= 0x17, code= 0x7, context= 0x8000eac0
PC = 0x800080d4, Cause = 0x20, Status Reg = 0x3041f003
-marc
--- Brad Ellis <brad@ccbootcamp.com> wrote:
> I've seen this before...try the following:
>
> 1) re-download a very small ip only 3640 image and
> try that
> if (1) doesnt work, then (2) try replacing the dram
> and try the upgrade
> again
> if (2) doesnt work, then (3) try replacing the flash
> (although it doesnt
> appear to be a flash issue)
>
> thanks,
> Brad Ellis
> CCIE#5796 (R&S / Security)
> CCSI#30482
> Network Learning Inc - A Cisco Sponsored
> Organization (SO)
> YES! We take Cisco Learning credits!
> brad@ccbootcamp.com
> www.ccbootcamp.com (Cisco Training and Advanced
> Technology Rental Racks)
> Voice: 702-968-5100
> FAX: 702-446-8012
> ----- Original Message -----
> From: "marc fernandez" <mag08036@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Friday, October 13, 2006 7:40 PM
> Subject: 3640 will not load image [bcc][faked-from]
>
>
> >I have a 3640 which had no mem or flash and would
> not
> > boot. I upgraded it to 128D/32F. Tried to
> download
> > flash via xmodem but image still won't load. I now
> can
> > only access it via rommon. Does anyone have any
> > answers in regards to what I am doing wrong or
> what is
> > wrong? below is the constant reboot I get after a
> > reset as there is no image on the box when I do a
> dir.
> > I need help desperatly.
> >
> > rommon 2 > reset
> >
> > System Bootstrap, Version 11.1(20)AA2, EARLY
> > DEPLOYMENT RELEASE SOFTWARE (fc1)
> > Copyright (c) 1999 by cisco Systems, Inc.
> > C3600 processor with 131072 Kbytes of main memory
> > Main memory is configured to 64 bit mode with
> parity
> > disabled
> >
> > program load complete, entry point: 0x80008000,
> size:
> > 0x1a7a6f8
> > Self decompressing the image :
> > Error : Uncompression of the image failed.
> > invalid compressed data--format violated
> >
> > Error : zip decompress failed
> >
> > *** System received a Software forced crash ***
> > signal= 0x17, code= 0x7, context= 0x8000eb40
> > PC = 0x800080d4, Cause = 0x20, Status Reg =
> 0x3041f003
> >
> > System Bootstrap, Version 11.1(20)AA2, EARLY
> > DEPLOYMENT RELEASE SOFTWARE (fc1)
> > Copyright (c) 1999 by cisco Systems, Inc.
> > C3600 processor with 131072 Kbytes of main memory
> > Main memory is configured to 64 bit mode with
> parity
> > disabled
> >
> > PCMCIA Slot0: No Card Present
> >
> > System Bootstrap, Version 11.1(20)AA2, EARLY
> > DEPLOYMENT RELEASE SOFTWARE (fc1)
> > Copyright (c) 1999 by cisco Systems, Inc.
> >
> >
> >
> > -marc
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> >
> >
>
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART