From: KSGoh (kianseng.goh@gmail.com)
Date: Tue Apr 04 2006 - 20:32:03 GMT-3
just doing my lab on VTP...
any debug cmd i can use to debug my vtp ?
or am i doing anything wrong ?
here's what i get in switch 1
3550-Switch1#sh vtp sta
VTP Version : 2
Configuration Revision : 2
Maximum VLANs supported locally : 1005
Number of existing VLANs : 7
VTP Operating Mode : Server
VTP Domain Name : ipexpert
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x9B 0x28 0xA0 0x44 0x41 0x5D 0x7F 0x12
Configuration last modified by 192.168.10.1 at 3-1-93 00:40:59
Local updater ID is 192.168.10.1 on interface Vl1 (lowest numbered VLAN
interfac
e found)
C3550-Switch1#
C3550-Switch1#sh vtp password
VTP Password: ipexpert
here's what i get in switch 2
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 5
VTP Operating Mode : Client
VTP Domain Name : ipexpert
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0xD9 0x41 0x71 0x01 0x39 0x52 0x18 0x86
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
Cat3550-Switch2#show vtp password
VTP Password: ipexpert
both switch are in the same domain, using same passoword..
but!!!! whenever i create a new vlan in switch1, it doesn't get populated to
switch2 ...??? is there any steps which i miss out ?
when i do a show vtp counters, both switch produce the same result
at3550-Switch2#sh vtp count
VTP statistics:
Summary advertisements received : 0
Subset advertisements received : 0
Request advertisements received : 0
Summary advertisements transmitted : 0
Subset advertisements transmitted : 0
Request advertisements transmitted : 0
Number of config revision errors : 0
Number of config digest errors : 0
Number of V1 summary errors : 0
VTP pruning statistics:
Trunk Join Transmitted Join Received Summary advts received
from
non-pruning-capable device
---------------- ---------------- ----------------
---------------------------
Cat3550-Switch2#
ANY idea ?
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3