From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Wed Apr 05 2006 - 06:44:56 GMT-3
way too old.... you'd better upgrading to 12.0...
I run this one on 3548XL... trunks are there....
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC13
no VTP without trunks...
A.
on 05/04/2006 05:29 Joel Desaulniers wrote:
> I'm not able to enable trunking on my switch; it is a 2924XL with 16
> FastEthernet ports and 2 FastEthernet (100BASEFX) ports. Has anyone ever
> seen this problem before? Could it be because I need to upgrade the IOS?
>
> Switch2(config)#int fastethernet 0/1
> Switch2(config-if)#switchport mode ?
> access Set trunking mode to ACCESS unconditionally
> multi Set trunking mode to multi-VLAN mode
>
> Switch2(config-if)#switchport mode
> Switch2(config-if)#switchport trunk ?
> % Unrecognized command
>
> Cisco Internetwork Operating System Software
> IOS (tm) C2900XL Software (C2900XL-HS-M), Version 11.2(8.2)SA6,
> MAINTENANCE INTERIM SOFTWARE
>
> Joel Desaulniers
> Network Analyst
> CCNP, CCNA
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Victor Cappuccio
> Sent: Tuesday, April 04, 2006 5:12 PM
> To: KSGoh
> Cc: Cisco certification
> Subject: Re: VTP!!
>
> Redo the VTP Part..
> Try it with no password..
>
>
> KSGoh escribis:
>
>> just doing my lab on VTP...
>>
>> any debug cmd i can use to debug my vtp ?
>> or am i doing anything wrong ?
>>
>> here's what i get in switch 1
>> 3550-Switch1#sh vtp sta
>> VTP Version : 2
>> Configuration Revision : 2
>> Maximum VLANs supported locally : 1005
>> Number of existing VLANs : 7
>> VTP Operating Mode : Server
>> VTP Domain Name : ipexpert
>> VTP Pruning Mode : Disabled
>> VTP V2 Mode : Disabled
>> VTP Traps Generation : Disabled
>> MD5 digest : 0x9B 0x28 0xA0 0x44 0x41 0x5D 0x7F
>>
> 0x12
>
>> Configuration last modified by 192.168.10.1 at 3-1-93 00:40:59
>> Local updater ID is 192.168.10.1 on interface Vl1 (lowest numbered
>>
> VLAN
>
>> interfac
>> e found)
>> C3550-Switch1#
>> C3550-Switch1#sh vtp password
>> VTP Password: ipexpert
>>
>> here's what i get in switch 2
>> VTP Version : 2
>> Configuration Revision : 0
>> Maximum VLANs supported locally : 1005
>> Number of existing VLANs : 5
>> VTP Operating Mode : Client
>> VTP Domain Name : ipexpert
>> VTP Pruning Mode : Disabled
>> VTP V2 Mode : Disabled
>> VTP Traps Generation : Disabled
>> MD5 digest : 0xD9 0x41 0x71 0x01 0x39 0x52 0x18
>>
> 0x86
>
>> Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
>> Cat3550-Switch2#show vtp password
>> VTP Password: ipexpert
>>
>> both switch are in the same domain, using same passoword..
>>
>> but!!!! whenever i create a new vlan in switch1, it doesn't get
>>
> populated to
>
>> switch2 ...??? is there any steps which i miss out ?
>>
>>
>> when i do a show vtp counters, both switch produce the same result
>>
>> at3550-Switch2#sh vtp count
>> VTP statistics:
>> Summary advertisements received : 0
>> Subset advertisements received : 0
>> Request advertisements received : 0
>> Summary advertisements transmitted : 0
>> Subset advertisements transmitted : 0
>> Request advertisements transmitted : 0
>> Number of config revision errors : 0
>> Number of config digest errors : 0
>> Number of V1 summary errors : 0
>>
>>
>> VTP pruning statistics:
>>
>> Trunk Join Transmitted Join Received Summary advts
>>
> received
>
>> from
>> non-pruning-capable
>>
> device
>
>> ---------------- ---------------- ----------------
>> ---------------------------
>> Cat3550-Switch2#
>>
>> ANY idea ?
>>
>>
>>
> _______________________________________________________________________
>
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3