From: Lee Gillespie (gillespie_ccie@yahoo.com)
Date: Wed Apr 05 2006 - 13:14:05 GMT-3
Friends dont let friends use VTP.
Is VTP still on the lab? Cisco has pretty much given
up on VTP last I heard.
--- Alexei Monastyrnyi <alexeim@orcsoftware.com>
wrote:
> way too old.... you'd better upgrading to 12.0...
> I run this one on 3548XL... trunks are there....
> IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version
> 12.0(5)WC13
>
> no VTP without trunks...
>
> A.
>
> on 05/04/2006 05:29 Joel Desaulniers wrote:
> > I'm not able to enable trunking on my switch; it
> is a 2924XL with 16
> > FastEthernet ports and 2 FastEthernet (100BASEFX)
> ports. Has anyone ever
> > seen this problem before? Could it be because I
> need to upgrade the IOS?
> >
> > Switch2(config)#int fastethernet 0/1
> > Switch2(config-if)#switchport mode ?
> > access Set trunking mode to ACCESS
> unconditionally
> > multi Set trunking mode to multi-VLAN mode
> >
> > Switch2(config-if)#switchport mode
> > Switch2(config-if)#switchport trunk ?
> > % Unrecognized command
> >
> > Cisco Internetwork Operating System Software
> > IOS (tm) C2900XL Software (C2900XL-HS-M), Version
> 11.2(8.2)SA6,
> > MAINTENANCE INTERIM SOFTWARE
> >
> > Joel Desaulniers
> > Network Analyst
> > CCNP, CCNA
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> > Victor Cappuccio
> > Sent: Tuesday, April 04, 2006 5:12 PM
> > To: KSGoh
> > Cc: Cisco certification
> > Subject: Re: VTP!!
> >
> > Redo the VTP Part..
> > Try it with no password..
> >
> >
> > KSGoh escribis:
> >
> >> just doing my lab on VTP...
> >>
> >> any debug cmd i can use to debug my vtp ?
> >> or am i doing anything wrong ?
> >>
> >> here's what i get in switch 1
> >> 3550-Switch1#sh vtp sta
> >> VTP Version : 2
> >> Configuration Revision : 2
> >> Maximum VLANs supported locally : 1005
> >> Number of existing VLANs : 7
> >> VTP Operating Mode : Server
> >> VTP Domain Name : ipexpert
> >> VTP Pruning Mode : Disabled
> >> VTP V2 Mode : Disabled
> >> VTP Traps Generation : Disabled
> >> MD5 digest : 0x9B 0x28 0xA0
> 0x44 0x41 0x5D 0x7F
> >>
> > 0x12
> >
> >> Configuration last modified by 192.168.10.1 at
> 3-1-93 00:40:59
> >> Local updater ID is 192.168.10.1 on interface Vl1
> (lowest numbered
> >>
> > VLAN
> >
> >> interfac
> >> e found)
> >> C3550-Switch1#
> >> C3550-Switch1#sh vtp password
> >> VTP Password: ipexpert
> >>
> >> here's what i get in switch 2
> >> VTP Version : 2
> >> Configuration Revision : 0
> >> Maximum VLANs supported locally : 1005
> >> Number of existing VLANs : 5
> >> VTP Operating Mode : Client
> >> VTP Domain Name : ipexpert
> >> VTP Pruning Mode : Disabled
> >> VTP V2 Mode : Disabled
> >> VTP Traps Generation : Disabled
> >> MD5 digest : 0xD9 0x41 0x71
> 0x01 0x39 0x52 0x18
> >>
> > 0x86
> >
> >> Configuration last modified by 0.0.0.0 at 0-0-00
> 00:00:00
> >> Cat3550-Switch2#show vtp password
> >> VTP Password: ipexpert
> >>
> >> both switch are in the same domain, using same
> passoword..
> >>
> >> but!!!! whenever i create a new vlan in switch1,
> it doesn't get
> >>
> > populated to
> >
> >> switch2 ...??? is there any steps which i miss
> out ?
> >>
> >>
> >> when i do a show vtp counters, both switch
> produce the same result
> >>
> >> at3550-Switch2#sh vtp count
> >> VTP statistics:
> >> Summary advertisements received : 0
> >> Subset advertisements received : 0
> >> Request advertisements received : 0
> >> Summary advertisements transmitted : 0
> >> Subset advertisements transmitted : 0
> >> Request advertisements transmitted : 0
> >> Number of config revision errors : 0
> >> Number of config digest errors : 0
> >> Number of V1 summary errors : 0
> >>
> >>
> >> VTP pruning statistics:
> >>
> >> Trunk Join Transmitted Join Received
> Summary advts
> >>
> > received
> >
> >> from
> >>
> non-pruning-capable
> >>
> > device
> >
> >> ---------------- ----------------
> ----------------
> >> ---------------------------
> >> Cat3550-Switch2#
> >>
> >> ANY idea ?
> >>
> >>
> >>
> >
>
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3