From: Tim (ccie2be@nyc.rr.com)
Date: Tue Apr 04 2006 - 22:42:53 GMT-3
Hey Joel,
what happens if you try this:
switchport mode multi ?
Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Joel
Desaulniers
Sent: Tuesday, April 04, 2006 11:30 PM
To: 'Victor Cappuccio'; 'KSGoh'
Cc: 'Cisco certification'
Subject: RE: VTP!!
I'm not able to enable trunking on my switch; it is a 2924XL with 16
FastEthernet ports and 2 FastEthernet (100BASEFX) ports. Has anyone ever
seen this problem before? Could it be because I need to upgrade the IOS?
Switch2(config)#int fastethernet 0/1
Switch2(config-if)#switchport mode ?
access Set trunking mode to ACCESS unconditionally
multi Set trunking mode to multi-VLAN mode
Switch2(config-if)#switchport mode
Switch2(config-if)#switchport trunk ?
% Unrecognized command
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-HS-M), Version 11.2(8.2)SA6,
MAINTENANCE INTERIM SOFTWARE
Joel Desaulniers
Network Analyst
CCNP, CCNA
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Victor Cappuccio
Sent: Tuesday, April 04, 2006 5:12 PM
To: KSGoh
Cc: Cisco certification
Subject: Re: VTP!!
Redo the VTP Part..
Try it with no password..
KSGoh escribis:
> just doing my lab on VTP...
>
> any debug cmd i can use to debug my vtp ?
> or am i doing anything wrong ?
>
> here's what i get in switch 1
> 3550-Switch1#sh vtp sta
> VTP Version : 2
> Configuration Revision : 2
> Maximum VLANs supported locally : 1005
> Number of existing VLANs : 7
> VTP Operating Mode : Server
> VTP Domain Name : ipexpert
> VTP Pruning Mode : Disabled
> VTP V2 Mode : Disabled
> VTP Traps Generation : Disabled
> MD5 digest : 0x9B 0x28 0xA0 0x44 0x41 0x5D 0x7F
0x12
> Configuration last modified by 192.168.10.1 at 3-1-93 00:40:59
> Local updater ID is 192.168.10.1 on interface Vl1 (lowest numbered
VLAN
> interfac
> e found)
> C3550-Switch1#
> C3550-Switch1#sh vtp password
> VTP Password: ipexpert
>
> here's what i get in switch 2
> VTP Version : 2
> Configuration Revision : 0
> Maximum VLANs supported locally : 1005
> Number of existing VLANs : 5
> VTP Operating Mode : Client
> VTP Domain Name : ipexpert
> VTP Pruning Mode : Disabled
> VTP V2 Mode : Disabled
> VTP Traps Generation : Disabled
> MD5 digest : 0xD9 0x41 0x71 0x01 0x39 0x52 0x18
0x86
> Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
> Cat3550-Switch2#show vtp password
> VTP Password: ipexpert
>
> both switch are in the same domain, using same passoword..
>
> but!!!! whenever i create a new vlan in switch1, it doesn't get
populated to
> switch2 ...??? is there any steps which i miss out ?
>
>
> when i do a show vtp counters, both switch produce the same result
>
> at3550-Switch2#sh vtp count
> VTP statistics:
> Summary advertisements received : 0
> Subset advertisements received : 0
> Request advertisements received : 0
> Summary advertisements transmitted : 0
> Subset advertisements transmitted : 0
> Request advertisements transmitted : 0
> Number of config revision errors : 0
> Number of config digest errors : 0
> Number of V1 summary errors : 0
>
>
> VTP pruning statistics:
>
> Trunk Join Transmitted Join Received Summary advts
received
> from
> non-pruning-capable
device
> ---------------- ---------------- ----------------
> ---------------------------
> Cat3550-Switch2#
>
> ANY idea ?
>
>
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3