From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Wed Apr 05 2006 - 18:08:33 GMT-3
I don't know about VTP future... don't see any wrong in it and yes, it is
still on the lab indeed... But here is quite different. Joel runs quite an
old version of switch IOS...
not VTP _between switches_ without trunk I surely meant :-)
A.
----- Original Message -----
From: "Lee Gillespie" <gillespie_ccie@yahoo.com>
To: "'Cisco certification'" <ccielab@groupstudy.com>
Sent: Wednesday, April 05, 2006 6:14 PM
Subject: Re: VTP!!
> Friends dont let friends use VTP.
>
> Is VTP still on the lab? Cisco has pretty much given
> up on VTP last I heard.
>
>
>
> --- Alexei Monastyrnyi <alexeim@orcsoftware.com>
> wrote:
>
>> way too old.... you'd better upgrading to 12.0...
>> I run this one on 3548XL... trunks are there....
>> IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version
>> 12.0(5)WC13
>>
>> no VTP without trunks...
>>
>> A.
>>
>> on 05/04/2006 05:29 Joel Desaulniers wrote:
>> > I'm not able to enable trunking on my switch; it
>> is a 2924XL with 16
>> > FastEthernet ports and 2 FastEthernet (100BASEFX)
>> ports. Has anyone ever
>> > seen this problem before? Could it be because I
>> need to upgrade the IOS?
>> >
>> > Switch2(config)#int fastethernet 0/1
>> > Switch2(config-if)#switchport mode ?
>> > access Set trunking mode to ACCESS
>> unconditionally
>> > multi Set trunking mode to multi-VLAN mode
>> >
>> > Switch2(config-if)#switchport mode
>> > Switch2(config-if)#switchport trunk ?
>> > % Unrecognized command
>> >
>> > Cisco Internetwork Operating System Software
>> > IOS (tm) C2900XL Software (C2900XL-HS-M), Version
>> 11.2(8.2)SA6,
>> > MAINTENANCE INTERIM SOFTWARE
>> >
>> > Joel Desaulniers
>> > Network Analyst
>> > CCNP, CCNA
>> >
>> >
>> > -----Original Message-----
>> > From: nobody@groupstudy.com
>> [mailto:nobody@groupstudy.com] On Behalf Of
>> > Victor Cappuccio
>> > Sent: Tuesday, April 04, 2006 5:12 PM
>> > To: KSGoh
>> > Cc: Cisco certification
>> > Subject: Re: VTP!!
>> >
>> > Redo the VTP Part..
>> > Try it with no password..
>> >
>> >
>> > KSGoh escribis:
>> >
>> >> just doing my lab on VTP...
>> >>
>> >> any debug cmd i can use to debug my vtp ?
>> >> or am i doing anything wrong ?
>> >>
>> >> here's what i get in switch 1
>> >> 3550-Switch1#sh vtp sta
>> >> VTP Version : 2
>> >> Configuration Revision : 2
>> >> Maximum VLANs supported locally : 1005
>> >> Number of existing VLANs : 7
>> >> VTP Operating Mode : Server
>> >> VTP Domain Name : ipexpert
>> >> VTP Pruning Mode : Disabled
>> >> VTP V2 Mode : Disabled
>> >> VTP Traps Generation : Disabled
>> >> MD5 digest : 0x9B 0x28 0xA0
>> 0x44 0x41 0x5D 0x7F
>> >>
>> > 0x12
>> >
>> >> Configuration last modified by 192.168.10.1 at
>> 3-1-93 00:40:59
>> >> Local updater ID is 192.168.10.1 on interface Vl1
>> (lowest numbered
>> >>
>> > VLAN
>> >
>> >> interfac
>> >> e found)
>> >> C3550-Switch1#
>> >> C3550-Switch1#sh vtp password
>> >> VTP Password: ipexpert
>> >>
>> >> here's what i get in switch 2
>> >> VTP Version : 2
>> >> Configuration Revision : 0
>> >> Maximum VLANs supported locally : 1005
>> >> Number of existing VLANs : 5
>> >> VTP Operating Mode : Client
>> >> VTP Domain Name : ipexpert
>> >> VTP Pruning Mode : Disabled
>> >> VTP V2 Mode : Disabled
>> >> VTP Traps Generation : Disabled
>> >> MD5 digest : 0xD9 0x41 0x71
>> 0x01 0x39 0x52 0x18
>> >>
>> > 0x86
>> >
>> >> Configuration last modified by 0.0.0.0 at 0-0-00
>> 00:00:00
>> >> Cat3550-Switch2#show vtp password
>> >> VTP Password: ipexpert
>> >>
>> >> both switch are in the same domain, using same
>> passoword..
>> >>
>> >> but!!!! whenever i create a new vlan in switch1,
>> it doesn't get
>> >>
>> > populated to
>> >
>> >> switch2 ...??? is there any steps which i miss
>> out ?
>> >>
>> >>
>> >> when i do a show vtp counters, both switch
>> produce the same result
>> >>
>> >> at3550-Switch2#sh vtp count
>> >> VTP statistics:
>> >> Summary advertisements received : 0
>> >> Subset advertisements received : 0
>> >> Request advertisements received : 0
>> >> Summary advertisements transmitted : 0
>> >> Subset advertisements transmitted : 0
>> >> Request advertisements transmitted : 0
>> >> Number of config revision errors : 0
>> >> Number of config digest errors : 0
>> >> Number of V1 summary errors : 0
>> >>
>> >>
>> >> VTP pruning statistics:
>> >>
>> >> Trunk Join Transmitted Join Received
>> Summary advts
>> >>
>> > received
>> >
>> >> from
>> >>
>> non-pruning-capable
>> >>
>> > device
>> >
>> >> ---------------- ----------------
>> ----------------
>> >> ---------------------------
>> >> Cat3550-Switch2#
>> >>
>> >> ANY idea ?
>> >>
>> >>
>> >>
>> >
>>
> _______________________________________________________________________
>> >
>> >> Subscription information may be found at:
>> >> http://www.groupstudy.com/list/CCIELab.html
>> >>
>> >
>> >
>>
> _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>>
> _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3