From: amir cohen (avi_patish@yahoo.com)
Date: Tue Mar 21 2006 - 09:16:46 GMT-3
Guys,
I have a 2610XM with NMHDV-1e1 ,
and when i am tryng to activate the command:
Pri-group time-slot 1-31, i am getting
" DSP Not enough DSP resources"
You have 0 DSP for time slots
here is the configuration:
=========================
SHOW VER:
Yeruham#show controller e1
E1 1/0 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20040802, FPGA: 255,
spm_count = 0
Framing is CRC4, Line Code is HDB3, Clock Source is
Line.
Current port master clock:recovered from controller
1/0
Data in current interval (138 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0
Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err
Secs, 0 Unavail Secs
Total Data (last 24 hours)
257564 Line Code Violations, 5834 Path Code
Violations,
3 Slip Secs, 4 Fr Loss Secs, 12 Line Err Secs, 2
Degraded Mins,
9 Errored Secs, 0 Bursty Err Secs, 5 Severely Err
Secs, 84192 Unavail Secs
Yeruham#show ver
Cisco IOS Software, C2600 Software
(C2600-ADVENTERPRISEK9_IVS-M), Version 12.4(5
a), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Fri 13-Jan-06 19:19 by alnguyen
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r],
RELEASE SOFTWARE (fc1)
Yeruham uptime is 1 week, 5 days, 16 hours, 3 minutes
System returned to ROM by reload
System image file is
"flash:c2600-adventerprisek9_ivs-mz.124-5a.bin"
This product contains cryptographic features and is
subject to United
States and local country laws governing import,
export, transfer and
use. Delivery of Cisco cryptographic products does not
imply
third-party authority to import, export, distribute or
use encryption.
Importers, exporters, distributors and users are
responsible for
compliance with U.S. and local country laws. By using
this product you
agree to comply with applicable laws and regulations.
If you are unable
to comply with U.S. and local laws, return this
product immediately.
A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by
sending email to
export@cisco.com.
Cisco 2610XM (MPC860P) processor (revision 4.1) with
124005K/7067K bytes of memo
ry.
Processor board ID FTX1002C03G
M860 processor: part number 5, mask 2
1 FastEthernet interface
2 Low-speed serial(sync/async) interfaces
1 Channelized E1/PRI port
32K bytes of NVRAM.
32768K bytes of processor board System flash
(Read/Write)
========================================
Configuration:
===============
Current configuration : 1464 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname XXXX
!
boot-start-marker
boot-end-marker
!
card type e1 1 1
enable password team1$
!
no aaa new-model
!
resource policy
!
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
!
!
!
!
!
!
!
isdn switch-type primary-net5
voice-card 1
dsp services dspfarm
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
controller E1 1/0
!
!
!
!
interface Loopback0
ip address 192.168.253.253 255.255.255.255
!
interface FastEthernet0/0
ip address 172.17.8.240 255.255.0.0 secondary
ip address 172.17.100.50 255.255.0.0
duplex auto
speed auto
!
interface Serial0/0
description Connection to the XXXXX
ip address 172.31.17.2 255.255.255.0
no dce-terminal-timing-enable
!
!
!
!
no ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
gatekeeper
shutdown
!
!
end
===============================
Anu IDEAS:-)
Amir
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3