From: amir cohen (avi_patish@yahoo.com)
Date: Tue Mar 21 2006 - 11:48:14 GMT-3
Guys,
Youe were right, there was no PVDM in the order,
Thank you for the support:-)
Amir
--- "Scott, Tyson C" <tyson.scott@hp.com> wrote:
> There is nothing wrong with what you got. The
> NM-HDV2-1T1/E1 does not
> come with any PVDM's by default. That is an add on.
>
>
http://www.cisco.com/en/US/products/hw/routers/ps282/products_data_sheet
> 09186a0080191d41.html
>
> Look at table 4 on the information
>
> It defines the PVDM's you need to order, You
> actually need to order the
> PVDM2 series
>
> Module Name
> Description
> Number of DSPs
> Maximum Channels in High-Complexity1 Codec
> Maximum Channels in Medium-Complexity2 Codec
> Maximum Channels in G.711 codec
>
> PVDM2-8
> 8-channel Packet Fax/Voice DSP Module
> 1
> 4
> 4
> 8
>
> PVDM2-16
> 16-channel Packet Fax/Voice DSP Module
> 1
> 6
> 8
> 16
>
> PVDM2-32
> 32-channel Packet Fax/Voice DSP Module
> 2
> 12
> 16
> 32
>
> PVDM2-48
> 48-channel Packet Fax/Voice DSP Module
> 3
> 18
> 24
> 48
>
> PVDM2-64
> 64-channel Packet Fax/Voice DSP Module
> 4
> 24
> 32
> 64
>
>
>
> Regards,
>
> Tyson Scott
> Network Engineer
> CCIE # 13513
>
>
> -----Original Message-----
> From: amir cohen [mailto:avi_patish@yahoo.com]
> Sent: Tuesday, March 21, 2006 9:06 AM
> To: Scott, Tyson C; Wolfgang Marschner; FORUM
> Subject: RE: 2610XM voice card problem?
>
> Guys,
>
>
> I checked and found int the DIAG:
>
> =============
> Slot 0:
> C2610XM 1FE Mainboard Port adapter, 3 ports
> Port adapter is analyzed
> Port adapter insertion time unknown
> EEPROM contents at hardware discovery:
> Hardware Revision : 4.1
> PCB Serial Number : FOC09423S17
> Version Identifier :
> Product (FRU) Number :
> Chassis Serial Number : FTX1002C03G
> Part Number : 73-7677-06
> RMA History : 00
> RMA Number : 0-0-0-0
> Board Revision : B0
> Deviation Number : 0-0
> EEPROM format version 4
> EEPROM contents (hex):
> 0x00: 04 FF 40 03 6A 41 04 01 C1 0B 46 4F 43 30
> 39
> 34
> 0x10: 32 33 53 31 37 89 FF FF FF FF CB 12 FF FF
> FF FF
> 0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> C2 0B
> 0x30: 46 54 58 31 30 30 32 43 30 33 47 82 49 1D
> FD
> 06
> 0x40: 04 00 81 00 00 00 00 42 42 30 80 00 00 00
> 00 FF
> 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF
> 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF
> 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF
>
> WIC Slot 0:
> Serial 2A/S (12in1)
> Hardware revision 1.0 Board revision B0
> Serial number 18219081 Part number
> 800-03182-01
> FRU Part Number WIC-2A/S=
> Test history 0x0 RMA number
> 00-00-00
> Connector type PCI
> EEPROM format version 1
> EEPROM contents (hex):
> 0x20: 01 13 01 00 01 16 00 49 50 0C 6E 01 00 00
> 00 00
> 0x30: 58 00 00 00 00 01 20 00 FF FF FF FF FF FF
> FF FF
>
> Slot 1:
> High Density Voice NM-HDV2-1T1/E1 Port adapter
> Port adapter is analyzed
> Port adapter insertion time unknown
> EEPROM contents at hardware discovery:
> Hardware Revision : 1.1
> Top Assy. Part Number : 800-22167-02
> Board Revision : C0
> Deviation Number : 0
> Fab Version : 04
> PCB Serial Number : FOC09504FMV
> RMA Test History : 00
> RMA Number : 0-0-0-0
> RMA History : 00
> Fab Part Number : 28-6126-04
> Manufacturing Test Data : 00 00 00 00 00 00 00 00
> Field Diagnostics Data : 00 00 00 00 00 00 00 00
> Product (FRU) Number : NM-HDV2-1T1/E1
> Version Identifier : V02
> EEPROM format version 4
> EEPROM contents (hex):
> 0x00: 04 FF 40 03 DA 41 01 01 C0 46 03 20 00 56
> 97
> 02
> 0x10: 42 43 30 88 00 00 00 00 02 04 C1 8B 46 4F
> 43 30
> 0x20: 39 35 30 34 46 4D 56 03 00 81 00 00 00 00
> 04 00
> 0x30: 85 1C 17 EE 04 C4 08 00 00 00 00 00 00 00
> 00
> C5
> 0x40: 08 00 00 00 00 00 00 00 00 CB 8E 4E 4D 2D
> 48
> 44
> 0x50: 56 32 2D 31 54 31 2F 45 31 89 56 30 32 20
> D9
> 02
> 0x60: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF
> 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> FF FF
>
> FPGA revision:0x16C
> WIC Slot 1:
> HDV2 on board t1/e1 controller (1 port)
>
>
>
>
>
>
> =============
>
>
> THERE IS NO PVDM IN IT!!!
>
>
> Is it a IOS issue, or the resseler sold me a voice
> card with no PVDM????
>
>
> HELP NEEDED:-)
>
>
> Amir
>
> --- "Scott, Tyson C" <tyson.scott@hp.com> wrote:
>
> > If all you have is a PVDM-12 you can only activate
> > 12 channels,
> > depending on the codec you are selecting it may
> even be less than 12.
> > Test it. First make sure your router is
> recognizing
=== message truncated ===
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3