From: Wolfgang Marschner (wmarschner@web.de)
Date: Tue Mar 21 2006 - 10:04:36 GMT-3
Amir,
please have a look at your router with the commands I mentioned in order to
get
a clue of what's going on. Then we can discuss it.
Here is a document which will help you testing your NM-HDV:
http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_tech_note09186a00800e66b1.shtml
Regards
Wolfgang
CSSI #23525, CCIE #8232
----- Original Message -----
From: "amir cohen" <avi_patish@yahoo.com>
To: "Wolfgang Marschner" <wmarschner@web.de>; "FORUM"
<ccielab@groupstudy.com>
Sent: Tuesday, March 21, 2006 1:49 PM
Subject: Re: 2610XM voice card problem?
> Wolfgang,
>
> This is a new card, and we bought it, along with the
> PVDM,
>
> question:
>
> DO i have to activate the pvdm?
>
> Do i have to do something with the NM??
>
>
> Amir
> --- Wolfgang Marschner <wmarschner@web.de> wrote:
>
>> Simply not enough DSPs available.
>> Have a look with the command s"how diag",
>> whether PVDM-12 modules are installed on the NM-HDV
>> and/or
>> check with the command "test dsp 1" your DSPs.
>> For your E1 you need at least 3 x PVDM-12!
>>
>> Regards
>>
>> Wolfgang
>> CSSI #23525, CCIE #8232
>>
>> ----- Original Message -----
>> From: "amir cohen" <avi_patish@yahoo.com>
>> To: "FORUM" <ccielab@groupstudy.com>
>> Sent: Tuesday, March 21, 2006 1:16 PM
>> Subject: 2610XM voice card problem?
>>
>>
>> > Guys,
>> >
>> >
>> > I have a 2610XM with NMHDV-1e1 ,
>> > and when i am tryng to activate the command:
>> >
>> > Pri-group time-slot 1-31, i am getting
>> >
>> > " DSP Not enough DSP resources"
>> > You have 0 DSP for time slots
>> >
>> >
>> > here is the configuration:
>> >
>> >
>> > =========================
>> >
>> > SHOW VER:
>> > Yeruham#show controller e1
>> > E1 1/0 is up.
>> > Applique type is Channelized E1 - balanced
>> > No alarms detected.
>> > alarm-trigger is not set
>> > Version info Firmware: 20040802, FPGA: 255,
>> > spm_count = 0
>> > Framing is CRC4, Line Code is HDB3, Clock Source
>> is
>> > Line.
>> > Current port master clock:recovered from
>> controller
>> > 1/0
>> > Data in current interval (138 seconds elapsed):
>> > 0 Line Code Violations, 0 Path Code Violations
>> > 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs,
>> 0
>> > Degraded Mins
>> > 0 Errored Secs, 0 Bursty Err Secs, 0 Severely
>> Err
>> > Secs, 0 Unavail Secs
>> > Total Data (last 24 hours)
>> > 257564 Line Code Violations, 5834 Path Code
>> > Violations,
>> > 3 Slip Secs, 4 Fr Loss Secs, 12 Line Err Secs,
>> 2
>> > Degraded Mins,
>> > 9 Errored Secs, 0 Bursty Err Secs, 5 Severely
>> Err
>> > Secs, 84192 Unavail Secs
>> > Yeruham#show ver
>> > Cisco IOS Software, C2600 Software
>> > (C2600-ADVENTERPRISEK9_IVS-M), Version 12.4(5
>> > a), RELEASE SOFTWARE (fc3)
>> > Technical Support:
>> http://www.cisco.com/techsupport
>> > Copyright (c) 1986-2006 by Cisco Systems, Inc.
>> > Compiled Fri 13-Jan-06 19:19 by alnguyen
>> >
>> > ROM: System Bootstrap, Version 12.2(8r) [cmong
>> 8r],
>> > RELEASE SOFTWARE (fc1)
>> >
>> > Yeruham uptime is 1 week, 5 days, 16 hours, 3
>> minutes
>> > System returned to ROM by reload
>> > System image file is
>> > "flash:c2600-adventerprisek9_ivs-mz.124-5a.bin"
>> >
>> >
>> > This product contains cryptographic features and
>> is
>> > subject to United
>> > States and local country laws governing import,
>> > export, transfer and
>> > use. Delivery of Cisco cryptographic products does
>> not
>> > imply
>> > third-party authority to import, export,
>> distribute or
>> > use encryption.
>> > Importers, exporters, distributors and users are
>> > responsible for
>> > compliance with U.S. and local country laws. By
>> using
>> > this product you
>> > agree to comply with applicable laws and
>> regulations.
>> > If you are unable
>> > to comply with U.S. and local laws, return this
>> > product immediately.
>> >
>> > A summary of U.S. laws governing Cisco
>> cryptographic
>> > products may be found at:
>> >
>>
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>> >
>> > If you require further assistance please contact
>> us by
>> > sending email to
>> > export@cisco.com.
>> >
>> > Cisco 2610XM (MPC860P) processor (revision 4.1)
>> with
>> > 124005K/7067K bytes of memo
>> > ry.
>> > Processor board ID FTX1002C03G
>> > M860 processor: part number 5, mask 2
>> > 1 FastEthernet interface
>> > 2 Low-speed serial(sync/async) interfaces
>> > 1 Channelized E1/PRI port
>> > 32K bytes of NVRAM.
>> > 32768K bytes of processor board System flash
>> > (Read/Write)
>> >
>> > ========================================
>> >
>> > Configuration:
>> >
>> >
>> > ===============
>> > Current configuration : 1464 bytes
>> > !
>> > version 12.4
>> > service timestamps debug datetime msec
>> > service timestamps log datetime msec
>> > no service password-encryption
>> > !
>> > hostname XXXX
>> > !
>> > boot-start-marker
>> > boot-end-marker
>> > !
>> > card type e1 1 1
>> > enable password team1$
>> > !
>> > no aaa new-model
>> > !
>> > resource policy
>> > !
>> > no network-clock-participate slot 1
>> > no network-clock-participate wic 0
>> > ip cef
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > isdn switch-type primary-net5
>> > voice-card 1
>> > dsp services dspfarm
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > !
>> > controller E1 1/0
>> > !
>> > !
>> > !
>> > !
>> > interface Loopback0
>> > ip address 192.168.253.253 255.255.255.255
>> > !
>> > interface FastEthernet0/0
>> > ip address 172.17.8.240 255.255.0.0 secondary
>> > ip address 172.17.100.50 255.255.0.0
>> > duplex auto
>> > speed auto
>>
> === message truncated ===
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3