From: amir cohen (avi_patish@yahoo.com)
Date: Tue Mar 21 2006 - 09:49:49 GMT-3
Wolfgang,
This is a new card, and we bought it, along with the
PVDM,
question:
DO i have to activate the pvdm?
Do i have to do something with the NM??
Amir
--- Wolfgang Marschner <wmarschner@web.de> wrote:
> Simply not enough DSPs available.
> Have a look with the command s"how diag",
> whether PVDM-12 modules are installed on the NM-HDV
> and/or
> check with the command "test dsp 1" your DSPs.
> For your E1 you need at least 3 x PVDM-12!
>
> Regards
>
> Wolfgang
> CSSI #23525, CCIE #8232
>
> ----- Original Message -----
> From: "amir cohen" <avi_patish@yahoo.com>
> To: "FORUM" <ccielab@groupstudy.com>
> Sent: Tuesday, March 21, 2006 1:16 PM
> Subject: 2610XM voice card problem?
>
>
> > Guys,
> >
> >
> > I have a 2610XM with NMHDV-1e1 ,
> > and when i am tryng to activate the command:
> >
> > Pri-group time-slot 1-31, i am getting
> >
> > " DSP Not enough DSP resources"
> > You have 0 DSP for time slots
> >
> >
> > here is the configuration:
> >
> >
> > =========================
> >
> > SHOW VER:
> > Yeruham#show controller e1
> > E1 1/0 is up.
> > Applique type is Channelized E1 - balanced
> > No alarms detected.
> > alarm-trigger is not set
> > Version info Firmware: 20040802, FPGA: 255,
> > spm_count = 0
> > Framing is CRC4, Line Code is HDB3, Clock Source
> is
> > Line.
> > Current port master clock:recovered from
> controller
> > 1/0
> > Data in current interval (138 seconds elapsed):
> > 0 Line Code Violations, 0 Path Code Violations
> > 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs,
> 0
> > Degraded Mins
> > 0 Errored Secs, 0 Bursty Err Secs, 0 Severely
> Err
> > Secs, 0 Unavail Secs
> > Total Data (last 24 hours)
> > 257564 Line Code Violations, 5834 Path Code
> > Violations,
> > 3 Slip Secs, 4 Fr Loss Secs, 12 Line Err Secs,
> 2
> > Degraded Mins,
> > 9 Errored Secs, 0 Bursty Err Secs, 5 Severely
> Err
> > Secs, 84192 Unavail Secs
> > Yeruham#show ver
> > Cisco IOS Software, C2600 Software
> > (C2600-ADVENTERPRISEK9_IVS-M), Version 12.4(5
> > a), RELEASE SOFTWARE (fc3)
> > Technical Support:
> http://www.cisco.com/techsupport
> > Copyright (c) 1986-2006 by Cisco Systems, Inc.
> > Compiled Fri 13-Jan-06 19:19 by alnguyen
> >
> > ROM: System Bootstrap, Version 12.2(8r) [cmong
> 8r],
> > RELEASE SOFTWARE (fc1)
> >
> > Yeruham uptime is 1 week, 5 days, 16 hours, 3
> minutes
> > System returned to ROM by reload
> > System image file is
> > "flash:c2600-adventerprisek9_ivs-mz.124-5a.bin"
> >
> >
> > This product contains cryptographic features and
> is
> > subject to United
> > States and local country laws governing import,
> > export, transfer and
> > use. Delivery of Cisco cryptographic products does
> not
> > imply
> > third-party authority to import, export,
> distribute or
> > use encryption.
> > Importers, exporters, distributors and users are
> > responsible for
> > compliance with U.S. and local country laws. By
> using
> > this product you
> > agree to comply with applicable laws and
> regulations.
> > If you are unable
> > to comply with U.S. and local laws, return this
> > product immediately.
> >
> > A summary of U.S. laws governing Cisco
> cryptographic
> > products may be found at:
> >
>
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
> >
> > If you require further assistance please contact
> us by
> > sending email to
> > export@cisco.com.
> >
> > Cisco 2610XM (MPC860P) processor (revision 4.1)
> with
> > 124005K/7067K bytes of memo
> > ry.
> > Processor board ID FTX1002C03G
> > M860 processor: part number 5, mask 2
> > 1 FastEthernet interface
> > 2 Low-speed serial(sync/async) interfaces
> > 1 Channelized E1/PRI port
> > 32K bytes of NVRAM.
> > 32768K bytes of processor board System flash
> > (Read/Write)
> >
> > ========================================
> >
> > Configuration:
> >
> >
> > ===============
> > Current configuration : 1464 bytes
> > !
> > version 12.4
> > service timestamps debug datetime msec
> > service timestamps log datetime msec
> > no service password-encryption
> > !
> > hostname XXXX
> > !
> > boot-start-marker
> > boot-end-marker
> > !
> > card type e1 1 1
> > enable password team1$
> > !
> > no aaa new-model
> > !
> > resource policy
> > !
> > no network-clock-participate slot 1
> > no network-clock-participate wic 0
> > ip cef
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > isdn switch-type primary-net5
> > voice-card 1
> > dsp services dspfarm
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > controller E1 1/0
> > !
> > !
> > !
> > !
> > interface Loopback0
> > ip address 192.168.253.253 255.255.255.255
> > !
> > interface FastEthernet0/0
> > ip address 172.17.8.240 255.255.0.0 secondary
> > ip address 172.17.100.50 255.255.0.0
> > duplex auto
> > speed auto
>
=== message truncated ===
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3