Peer Neighbor Route

Hi all,

I have some issue with peer neighbor route.

Network Setup
                                                      EIGRP Domain
                                          ________________________
                                             |
       |
                                             |
       |
                 OSPF 2 | OSPF 1 |
R4 ------------PPPoE-----------------R3-------------------------------R2

R3 has three routes as below once the PPPoE has been setup.

C 5.5.34.3/32 is directly connected, Dialer1
O 5.5.34.0/24 [110/1786] via 5.5.34.4, 00:14:17
C 5.5.34.4/32 is directly connected, Dialer1

However on R2, it has only two routes as below.

O IA 5.5.34.3/32 [110/1849] via 5.5.23.3, 00:14:13, Serial0/1
O IA 5.5.34.0/24 [110/1850] via 5.5.23.3, 00:14:13, Serial0/1

The ospf network statement is correct using "network 5.5.34.0 0.0.0.255
area 2" on R3. My question is what happen to 5.5.34.4 route. It should
appear in R2 as interarea routes right. Another question is once i perform
mutual redistribution on R3 and R2, i receive 5.5.34.4/32 as external
routes. Puzzled.

Regards

Blogs and organic groups at http://www.ccie.net
Received on Tue May 29 2012 - 23:49:54 ART