Re: Peer Neighbor Route

The peer neighbor-route command on the interface serial with ppp encapsulation will add the /32 route of the other end router.

Try no peer neighbor-route both end, shut and mo shut.. those additional /32 route will be gone..

Aris
CCIE #35534
Sent from my HTC

----- Reply message -----
From: "Vincent Tay" <vtay.75_at_gmail.com>
To: "Ccielab_at_groupstudy.com" <ccielab_at_groupstudy.com>
Subject: Peer Neighbor Route
Date: Tue, May 29, 2012 11:49 PM

Hi all,

I have some issue with peer neighbor route.

Network Setup
                                                      EIGRP Domain
                                          ________________________
                                             |
       |
                                             |
       |
                 OSPF 2 | OSPF 1 |
R4 ------------PPPoE-----------------R3-------------------------------R2

R3 has three routes as below once the PPPoE has been setup.

C 5.5.34.3/32 is directly connected, Dialer1
O 5.5.34.0/24 [110/1786] via 5.5.34.4, 00:14:17
C 5.5.34.4/32 is directly connected, Dialer1

However on R2, it has only two routes as below.

O IA 5.5.34.3/32 [110/1849] via 5.5.23.3, 00:14:13, Serial0/1
O IA 5.5.34.0/24 [110/1850] via 5.5.23.3, 00:14:13, Serial0/1

The ospf network statement is correct using "network 5.5.34.0 0.0.0.255
area 2" on R3. My question is what happen to 5.5.34.4 route. It should
appear in R2 as interarea routes right. Another question is once i perform
mutual redistribution on R3 and R2, i receive 5.5.34.4/32 as external
routes. Puzzled.

Regards

Blogs and organic groups at http://www.ccie.net
Received on Thu May 31 2012 - 07:23:15 ART