From: Michael Zuo (mzuo@ixiacom.com)
Date: Sun Nov 19 2006 - 15:36:17 ART
Hi Group,
I see the following on my router:
R4(config-if)#do sh fram pvc | in DLCI
DLCI = 401, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/0
DLCI = 402, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
Serial0/0
DLCI = 403, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE =
Serial0/0
DLCI = 405, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
Serial0/0
DLCI = 413, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/0
R4(config-if)#do sh run int s0/0
Building configuration...
Current configuration : 238 bytes
!
interface Serial0/0
ip address 154.1.0.4 255.255.255.0
encapsulation frame-relay
no arp frame-relay
frame-relay map ip 154.1.0.3 403
frame-relay map ip 154.1.0.5 403
frame-relay interface-dlci 403
no frame-relay inverse-arp
end
R4(config-if)#
Is there any way I can find out why PVC 403 is inactive?
Thanks a lot
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART