From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Sun Nov 19 2006 - 15:02:41 ART
Ben,
You are mixing up the logical topology and the physical
topology. R5's E0/0 connects to SW1's Fa0/5 (Fa1/5 on Dynamips). SW2's
Fa0/15 connects to SW1's Fa0/15. Based on this how can you configure
R5's E0/0 and SW2's Fa0/15 in the same broadcast domain?
HTH,
Brian McGahan, CCIE #8593 (R&S/SP)
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Ben Holko
> Sent: Sunday, November 19, 2006 2:09 AM
> To: ccielab@groupstudy.com
> Subject: RE: IE dynagen topology - something wrong?
>
> Hi Brian,
>
> I have version 3.05
>
> Ben
>
>
> ________________________________
>
> From: Brian Dennis [mailto:bdennis@internetworkexpert.com]
> Sent: Sun 11/19/2006 3:34 PM
> To: Ben Holko; ccielab@groupstudy.com
> Subject: RE: IE dynagen topology - something wrong?
>
>
>
> I believe that the dynagen topology that Brian McGahan posted was for
> version 3 of the workbook. The sample lab you downloaded my have been
> version 4.
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com <http://www.internetworkexpert.com/>
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Ben Holko
> Sent: Saturday, November 18, 2006 8:15 PM
> To: ccielab@groupstudy.com
> Subject: IE dynagen topology - something wrong?
>
> Hey all,
>
>
>
> I'm working through the IE sample lab, and the diagram shows R5 e0/0
> connected to sw2 Fa0/15, but the dynagen config has R5 connected to
sw1
> port 5 and sw2 port 5
>
>
>
> am i missing something here?
>
>
>
> Ben
>
>
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART