Please re- read a see can you help (More exact problem)

From: Casey, Paul (6822) (Paul.Casey@xxxxxx)
Date: Fri Jun 21 2002 - 14:25:15 GMT-3

   
Password recovery page doesnt doesnt help

You dont see anything with console access in Hyperterminal...

Here my serious problem

I have a router and I dont know the enable password for it, 12-14 months old
and no one can remember the password.
Thats not the worst
I can get into user mode and when I type show version the confreg register
is set to 0x1202 ... (seemed a bit funny)

Now when the router boots and I connect to the console port you cant see
anything happening on the console port, therefore I cant get into romon
mode Pressing keys has not effect, You just cant see anything or do
anything

This confreg-reg setting must have done something serious.

However, after several minutes when I connect to the aux port I get "press
any key to continue" appears on hyper
terminal screen and I am back in user mode again.
Aux mode only becomes active after bootup,

image is still booting so thats ok, but back in user access, without
password.
and cant get to console because of the confreg-reg setting ..... and cant
change confreg-reg from user mode..

I need to get access to this router ASAP and get access to romon fix the
password problem.

it is a 2600 series router .....
Also when I check the interfaces for user mode, they are all
administratively shut down... so thats no help...

I seemed to be locked out of the router, except for user mode which seems to
be good for nothing.
A bit of a catch 22 situation.

Any help appreciated.,..

*******************************************************************************
*********

This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
                  telephone ++ 353 1 6095000.

*******************************************************************************
**********

This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:39 GMT-3