From: Joe Higgins (netsat@xxxxxxxxxxxxx)
Date: Fri Jun 21 2002 - 16:08:56 GMT-3
I believe that 0x1xxx config reg means that it is set to 1200 line speed. Try
changing your
hyperternminal console speed to 1200.
"Casey, Paul (6822)" wrote:
> Password recovery page doesnt doesnt help
>
> You dont see anything with console access in Hyperterminal...
>
> Here my serious problem
>
> I have a router and I dont know the enable password for it, 12-14 months old
> and no one can remember the password.
> Thats not the worst
> I can get into user mode and when I type show version the confreg register
> is set to 0x1202 ... (seemed a bit funny)
>
> Now when the router boots and I connect to the console port you cant see
> anything happening on the console port, therefore I cant get into romon
> mode Pressing keys has not effect, You just cant see anything or do
> anything
>
> This confreg-reg setting must have done something serious.
>
> However, after several minutes when I connect to the aux port I get "press
> any key to continue" appears on hyper
> terminal screen and I am back in user mode again.
> Aux mode only becomes active after bootup,
>
> image is still booting so thats ok, but back in user access, without
> password.
> and cant get to console because of the confreg-reg setting ..... and cant
> change confreg-reg from user mode..
>
> I need to get access to this router ASAP and get access to romon fix the
> password problem.
>
> it is a 2600 series router .....
> Also when I check the interfaces for user mode, they are all
> administratively shut down... so thats no help...
>
> I seemed to be locked out of the router, except for user mode which seems to
> be good for nothing.
> A bit of a catch 22 situation.
>
> Any help appreciated.,..
>
> *****************************************************************************
***********
>
> This E-mail is from O2. The E-mail and any files
> transmitted with it are confidential and may also be privileged and intended
> solely for the use of the individual or entity to whom they are addressed.
> Any unauthorised direct or indirect dissemination, distribution or copying
> of this message and any attachments is strictly prohibited. If you have
> received the E-mail in error please notify postmaster@O2.com or
> telephone ++ 353 1 6095000.
>
> *****************************************************************************
************
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:39 GMT-3