From: louis john (west_coast@inbox.com)
Date: Fri Jun 29 2007 - 10:22:16 ART
Hi Group : I have collected the following debug out of the BSR router , please tell me if this way of verification is valid to know who was elected as RP
debug ip pim bsr
*Mar 1 01:25:30.175: PIM-BSR(0): RP-set for 224.0.0.0/4
*Mar 1 01:25:30.179: PIM-BSR(0): RP(1) 130.100.5.5, holdtime 11 sec priority 100
*Mar 1 01:25:30.179: PIM-BSR(0): RP(2) 130.100.2.2, holdtime 119 sec priority 200
in the above debug, can we say R5 was elected because of two things : ?
1 - Lower Priority
2 - RP(1) is shown as the first RP in the RP-set.
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:52 ART