From: Ivan (ivan@iip.net)
Date: Fri Jun 29 2007 - 10:34:36 ART
BSR doesn't elect RP. BSR only spread information about RP across multicast
domain. Each router decide wich RP it will be use. Lower priority more
prefer.
On Friday 29 June 2007 17:22, louis john wrote:
> Hi Group : I have collected the following debug out of the BSR router ,
> please tell me if this way of verification is valid to know who was elected
> as RP
>
> debug ip pim bsr
>
> *Mar 1 01:25:30.175: PIM-BSR(0): RP-set for 224.0.0.0/4
> *Mar 1 01:25:30.179: PIM-BSR(0): RP(1) 130.100.5.5, holdtime 11 sec
> priority 100 *Mar 1 01:25:30.179: PIM-BSR(0): RP(2) 130.100.2.2,
> holdtime 119 sec priority 200
>
>
> in the above debug, can we say R5 was elected because of two things : ?
>
> 1 - Lower Priority
> 2 - RP(1) is shown as the first RP in the RP-set.
>
> ____________________________________________________________
> FREE ONLINE PHOTOSHARING - Share your photos online with your friends and
> family! Visit http://www.inbox.com/photosharing to find out more!
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:52 ART