From: James Simons (ccie.jimmy@gmail.com)
Date: Sat Apr 08 2006 - 21:28:18 GMT-3
hello all,
I am trying to configure a frame-relay connection between two directly
connected routers. I believe what I have should work but when I do flap the
interface, the line protocol comes up for a few seconds and then goes back
down. Is there ayway to do this without using PPPoFR? my config is below.
thanks,
jimmy
R1----------
int s0/0
no ip address
encapsulation frame-relay
clockrate 64000
int s0/0.1 point-to-point
ip address 10.10.10.1 255.255.255.0
frame-relay interface-dlci 100
R2------------
int s0/0
no ip address
encapsulation frame-relay
int s0/0.1 point-to-point
ip address 10.10.10.2 255.255.255.0
frame-relay interface-dlci 100
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3