From: marvin greenlee (marvin@ccbootcamp.com)
Date: Thu Jul 21 2005 - 17:23:44 GMT-3
The address needs to match a local address on the router (usually 1.1.1.1 is
added as a loopback.)
The other parts are configured under the line 1 16. You may also want to
include things such as exec timeouts for the lines.
Marvin Greenlee, CCIE#12237, CCSI# 30483
Network Learning Inc
marvin@ccbootcamp.com
www.ccbootcamp.com (Cisco Training)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
Matus
Sent: Thursday, July 21, 2005 1:13 PM
To: ccielab@groupstudy.com
Subject: termal server revese telnet config [bcc][faked-from]
Importance: Low
i'm helping a bud here at work set up a termial server to remote into his
other routers. he has a 2511 with 16 async ports, the serial to rj45 type
(2 serial connections on the 2511) so he has the octal cables. i'm assuming
that the octal cables go into the console ports. other than that, what is
needed on the 2511 to telnet into the other routers. i know you need:
ip host r1 2001 1.1.1.1 <----------- is the address arbitrary?
do you confgure the following on the line console or line?
line con 0
or
line 1 16?
tarnsport output(input?) all
modem inout
where does this go?
TIA
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3