From: istong@stong.org
Date: Thu Jul 21 2005 - 19:33:28 GMT-3
Has to be the cable that is the issue based on info
provided.
Ian
www.ccie4u.com
Rack Rentals starting at only $12
> i should have also said that the green light was on when
> the cables were reversed (when 1-8 were working).
>
> >From: marvin greenlee <marvin@ccbootcamp.com>
> >To: 'John Matus' <john_matus@hotmail.com>,
> ccielab@groupstudy.com >Subject: RE: termal server revese
> telnet config [bcc][faked-from] >Date: Thu, 21 Jul 2005
> 15:20:33 -0700 >
> >3 - bad cable
> >
> >Marvin Greenlee, CCIE#12237, CCSI# 30483
> >Network Learning Inc
> >marvin@ccbootcamp.com
> >www.ccbootcamp.com (Cisco Training)
> >
> >
> >-----Original Message-----
> >From: John Matus [mailto:john_matus@hotmail.com]
> >Sent: Thursday, July 21, 2005 3:13 PM
> >To: john_matus@hotmail.com; marvin greenlee;
> ccielab@groupstudy.com >Subject: RE: termal server revese
> telnet config [bcc][faked-from] >
> >new problem same beast.
> >
> >the 2511 has 2 octal cables for async ports. ports 1-8
> work fine. ports >9-16 don't work at all. i swapped the
> cables and now 1-8 won't work. i'm >thinking 1 or 2
> things. 1) async serial port-bank 9-16 is bad, or (this
> is >a stretch). ports 9-16 wont work unless there is a
> functional cable on >ports
> >
> >1-8........?
> >
> > >From: "John Matus" <john_matus@hotmail.com>
> > >Reply-To: "John Matus" <john_matus@hotmail.com>
> > >To: marvin@ccbootcamp.com, ccielab@groupstudy.com
> > >Subject: RE: termal server revese telnet config
> > [bcc][faked-from] >Date: Thu, 21 Jul 2005 20:39:05 +0000
> > >
> > >ahhhhhhhhhhh. that's the piece of info i needed...works
> > great now!!! ;) >
> > >>From: marvin greenlee <marvin@ccbootcamp.com>
> > >>Reply-To: marvin greenlee <marvin@ccbootcamp.com>
> > >>To: "'John Matus'" <john_matus@hotmail.com>,
> > ccielab@groupstudy.com >>Subject: RE: termal server
> > revese telnet config [bcc][faked-from] >>Date: Thu, 21
> > Jul 2005 13:30:37 -0700 >>
> > >>Should have been more clear. Needs to match an
> > address locally on the >>term
> > >>server.
> > >>
> > >>Marvin Greenlee, CCIE#12237, CCSI# 30483
> > >>Network Learning Inc
> > >>marvin@ccbootcamp.com
> > >>www.ccbootcamp.com (Cisco Training)
> > >>
> > >>
> > >>-----Original Message-----
> > >>From: John Matus [mailto:john_matus@hotmail.com]
> > >>Sent: Thursday, July 21, 2005 1:24 PM
> > >>To: marvin greenlee; ccielab@groupstudy.com
> > >>Subject: RE: termal server revese telnet config
> > [bcc][faked-from] >>
> > >>ok, i don't understand the ip address part of this.
> take for example >the
> > >>racks that you rent online. when you log into the
> terminal server you >do
> > >>a
> > >>reverse telnet into say R1. R1 has a completely blank
> > configuration (i >>believe), so how can you assign the
> > ip address of the ethernet interface >>or
> > >>the loopback interface.....and why would you assign
> > this when you are >>initiating the session through the
> > async ports where (i would think) ip >>addresses have no
> > meaning?? :-0 >>
> > >> >From: marvin greenlee <marvin@ccbootcamp.com>
> > >> >To: 'John Matus' <john_matus@hotmail.com>,
> > ccielab@groupstudy.com >> >Subject: RE: termal server
> > revese telnet config [bcc][faked-from] >> >Date: Thu, 21
> > Jul 2005 13:23:44 -0700 >> >
> > >> >The address needs to match a local address on the
> > router (usually >>1.1.1.1
> > >> >is
> > >> >added as a loopback.)
> > >> >
> > >> >The other parts are configured under the line 1 16.
> > You may also want >>to
> > >> >include things such as exec timeouts for the lines.
> > >> >
> > >> >Marvin Greenlee, CCIE#12237, CCSI# 30483
> > >> >Network Learning Inc
> > >> >marvin@ccbootcamp.com
> > >> >www.ccbootcamp.com (Cisco Training)
> > >> >
> > >> >
> > >> >-----Original Message-----
> > >> >From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf >Of
> > >> >John
> > >> >Matus
> > >> >Sent: Thursday, July 21, 2005 1:13 PM
> > >> >To: ccielab@groupstudy.com
> > >> >Subject: termal server revese telnet config
> > [bcc][faked-from] >> >Importance: Low
> > >> >
> > >> >i'm helping a bud here at work set up a termial
> > server to remote into >>his
> > >> >other routers. he has a 2511 with 16 async ports,
> > the serial to rj45 >>type
> > >> >(2 serial connections on the 2511) so he has the
> > octal cables. i'm >> >assuming
> > >> >
> > >> >that the octal cables go into the console ports.
> other than that, >what
> > >>is
> > >> >needed on the 2511 to telnet into the other routers.
> i know you >need:
> > >> >
> > >> >ip host r1 2001 1.1.1.1 <----------- is the address
> > arbitrary? >> >
> > >> >do you confgure the following on the line console or
> > line? >> >line con 0
> > >> >or
> > >> >line 1 16?
> > >> >
> > >> >tarnsport output(input?) all
> > >> >modem inout
> > >> >
> > >> >where does this go?
> > >> >
> > >> >TIA
> > >> >
> > >>
> >_________________________________________________________
> > ________ >> >Dont just search. Find. Check out the
new
> > MSN Search! >>
> >http://search.msn.click-url.com/go/onm00200636ave/direct/
> > 01/ >> >
> > >>
> >
> >_________________________________________________________
> > ______________ >> >Subscription information may be found
> > at: >> >http://www.groupstudy.com/list/CCIELab.html
> > >>
> >
> >>________________________________________________________
> > _________ >>Express yourself instantly with MSN
> Messenger! Download today - it's >FREE!
> >
> >>http://messenger.msn.click-url.com/go/onm00200471ave/dir
> > ect/01/ >>
> >
> >>________________________________________________________
> > _______________ >>Subscription information may be found
> > at: >>http://www.groupstudy.com/list/CCIELab.html
> > >
> >
> >_________________________________________________________
> > ________ >Express yourself instantly with MSN Messenger!
> Download today - it's >FREE!
> >
> >http://messenger.msn.click-url.com/go/onm00200471ave/dire
> > ct/01/ >
> >
> >_________________________________________________________
> > ______________ >Subscription information may be found
> > at: >http://www.groupstudy.com/list/CCIELab.html
> >
> >_________________________________________________________
> ________ >Express yourself instantly with MSN Messenger!
> Download today - it's FREE!
> >http://messenger.msn.click-url.com/go/onm00200471ave/dire
> ct/01/
>
> __________________________________________________________
> _______ Express yourself instantly with MSN Messenger!
> Download today - it's FREE!
>
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
> __________________________________________________________
> _____________ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Ian Stong
http://www.ccie4u.com
"Rack Rentals and Lab Scenarios starting at only $12"
support@ccie4u.com
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3