From: marvin greenlee (marvin@ccbootcamp.com)
Date: Thu Jul 21 2005 - 19:20:33 GMT-3
3 - bad cable
Marvin Greenlee, CCIE#12237, CCSI# 30483
Network Learning Inc
marvin@ccbootcamp.com
www.ccbootcamp.com (Cisco Training)
-----Original Message-----
From: John Matus [mailto:john_matus@hotmail.com]
Sent: Thursday, July 21, 2005 3:13 PM
To: john_matus@hotmail.com; marvin greenlee; ccielab@groupstudy.com
Subject: RE: termal server revese telnet config [bcc][faked-from]
new problem same beast.
the 2511 has 2 octal cables for async ports. ports 1-8 work fine. ports
9-16 don't work at all. i swapped the cables and now 1-8 won't work. i'm
thinking 1 or 2 things. 1) async serial port-bank 9-16 is bad, or (this is
a stretch). ports 9-16 wont work unless there is a functional cable on ports
1-8........?
>From: "John Matus" <john_matus@hotmail.com>
>Reply-To: "John Matus" <john_matus@hotmail.com>
>To: marvin@ccbootcamp.com, ccielab@groupstudy.com
>Subject: RE: termal server revese telnet config [bcc][faked-from]
>Date: Thu, 21 Jul 2005 20:39:05 +0000
>
>ahhhhhhhhhhh. that's the piece of info i needed...works great now!!! ;)
>
>>From: marvin greenlee <marvin@ccbootcamp.com>
>>Reply-To: marvin greenlee <marvin@ccbootcamp.com>
>>To: "'John Matus'" <john_matus@hotmail.com>, ccielab@groupstudy.com
>>Subject: RE: termal server revese telnet config [bcc][faked-from]
>>Date: Thu, 21 Jul 2005 13:30:37 -0700
>>
>>Should have been more clear. Needs to match an address locally on the
>>term
>>server.
>>
>>Marvin Greenlee, CCIE#12237, CCSI# 30483
>>Network Learning Inc
>>marvin@ccbootcamp.com
>>www.ccbootcamp.com (Cisco Training)
>>
>>
>>-----Original Message-----
>>From: John Matus [mailto:john_matus@hotmail.com]
>>Sent: Thursday, July 21, 2005 1:24 PM
>>To: marvin greenlee; ccielab@groupstudy.com
>>Subject: RE: termal server revese telnet config [bcc][faked-from]
>>
>>ok, i don't understand the ip address part of this. take for example the
>>racks that you rent online. when you log into the terminal server you do
>>a
>>reverse telnet into say R1. R1 has a completely blank configuration (i
>>believe), so how can you assign the ip address of the ethernet interface
>>or
>>the loopback interface.....and why would you assign this when you are
>>initiating the session through the async ports where (i would think) ip
>>addresses have no meaning?? :-0
>>
>> >From: marvin greenlee <marvin@ccbootcamp.com>
>> >To: 'John Matus' <john_matus@hotmail.com>, ccielab@groupstudy.com
>> >Subject: RE: termal server revese telnet config [bcc][faked-from]
>> >Date: Thu, 21 Jul 2005 13:23:44 -0700
>> >
>> >The address needs to match a local address on the router (usually
>>1.1.1.1
>> >is
>> >added as a loopback.)
>> >
>> >The other parts are configured under the line 1 16. You may also want
>>to
>> >include things such as exec timeouts for the lines.
>> >
>> >Marvin Greenlee, CCIE#12237, CCSI# 30483
>> >Network Learning Inc
>> >marvin@ccbootcamp.com
>> >www.ccbootcamp.com (Cisco Training)
>> >
>> >
>> >-----Original Message-----
>> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>> >John
>> >Matus
>> >Sent: Thursday, July 21, 2005 1:13 PM
>> >To: ccielab@groupstudy.com
>> >Subject: termal server revese telnet config [bcc][faked-from]
>> >Importance: Low
>> >
>> >i'm helping a bud here at work set up a termial server to remote into
>>his
>> >other routers. he has a 2511 with 16 async ports, the serial to rj45
>>type
>> >(2 serial connections on the 2511) so he has the octal cables. i'm
>> >assuming
>> >
>> >that the octal cables go into the console ports. other than that, what
>>is
>> >needed on the 2511 to telnet into the other routers. i know you need:
>> >
>> >ip host r1 2001 1.1.1.1 <----------- is the address arbitrary?
>> >
>> >do you confgure the following on the line console or line?
>> >line con 0
>> >or
>> >line 1 16?
>> >
>> >tarnsport output(input?) all
>> >modem inout
>> >
>> >where does this go?
>> >
>> >TIA
>> >
>> >_________________________________________________________________
>> >Dont just search. Find. Check out the new MSN Search!
>> >http://search.msn.click-url.com/go/onm00200636ave/direct/01/
>> >
>> >_______________________________________________________________________
>> >Subscription information may be found at:
>> >http://www.groupstudy.com/list/CCIELab.html
>>
>>_________________________________________________________________
>>Express yourself instantly with MSN Messenger! Download today - it's FREE!
>>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>
>_________________________________________________________________
>Express yourself instantly with MSN Messenger! Download today - it's FREE!
>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3