From: marvin greenlee (marvin@ccbootcamp.com)
Date: Thu Jul 21 2005 - 17:30:37 GMT-3
Should have been more clear. Needs to match an address locally on the term
server.
Marvin Greenlee, CCIE#12237, CCSI# 30483
Network Learning Inc
marvin@ccbootcamp.com
www.ccbootcamp.com (Cisco Training)
-----Original Message-----
From: John Matus [mailto:john_matus@hotmail.com]
Sent: Thursday, July 21, 2005 1:24 PM
To: marvin greenlee; ccielab@groupstudy.com
Subject: RE: termal server revese telnet config [bcc][faked-from]
ok, i don't understand the ip address part of this. take for example the
racks that you rent online. when you log into the terminal server you do a
reverse telnet into say R1. R1 has a completely blank configuration (i
believe), so how can you assign the ip address of the ethernet interface or
the loopback interface.....and why would you assign this when you are
initiating the session through the async ports where (i would think) ip
addresses have no meaning?? :-0
>From: marvin greenlee <marvin@ccbootcamp.com>
>To: 'John Matus' <john_matus@hotmail.com>, ccielab@groupstudy.com
>Subject: RE: termal server revese telnet config [bcc][faked-from]
>Date: Thu, 21 Jul 2005 13:23:44 -0700
>
>The address needs to match a local address on the router (usually 1.1.1.1
>is
>added as a loopback.)
>
>The other parts are configured under the line 1 16. You may also want to
>include things such as exec timeouts for the lines.
>
>Marvin Greenlee, CCIE#12237, CCSI# 30483
>Network Learning Inc
>marvin@ccbootcamp.com
>www.ccbootcamp.com (Cisco Training)
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>John
>Matus
>Sent: Thursday, July 21, 2005 1:13 PM
>To: ccielab@groupstudy.com
>Subject: termal server revese telnet config [bcc][faked-from]
>Importance: Low
>
>i'm helping a bud here at work set up a termial server to remote into his
>other routers. he has a 2511 with 16 async ports, the serial to rj45 type
>(2 serial connections on the 2511) so he has the octal cables. i'm
>assuming
>
>that the octal cables go into the console ports. other than that, what is
>needed on the 2511 to telnet into the other routers. i know you need:
>
>ip host r1 2001 1.1.1.1 <----------- is the address arbitrary?
>
>do you confgure the following on the line console or line?
>line con 0
>or
>line 1 16?
>
>tarnsport output(input?) all
>modem inout
>
>where does this go?
>
>TIA
>
>_________________________________________________________________
>Dont just search. Find. Check out the new MSN Search!
>http://search.msn.click-url.com/go/onm00200636ave/direct/01/
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3