From: Barker, Ray (Ray.Barker@BellSouth.com)
Date: Fri Oct 03 2003 - 11:23:58 GMT-3
R1----OSPF----R2----OSPF----R3----No routing protocol running----R4
Do not run a routing protocol between R3 and R4; however you should be able to ping R4 from any other router on the network.
My thought was to redistribute the connected network between R3 and R4 into ospf and then do a static nat between R3 and R4.
That did not work and I'm having trouble coming up with another solution. Anyone have any ideas?
Thanks,
Ray
*****
"The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential, proprietary, and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from all computers." 113
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:56 GMT-3