From: Kenneth Wygand (KWygand@customonline.com)
Date: Fri Oct 03 2003 - 11:52:15 GMT-3
Ray,
Does the question specifically forbid you from using static routes?
It's easy to overlook the obvious and make something really complex when
in "CCIE Crunch Mode".
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, MCP 2000, CNA 5.1, Network+, A+
Custom Computer Specialists, Inc.
"It's not just about ending up where you want to be, it's about making
the most of the trip there."
-Anonymous
-----Original Message-----
From: Barker, Ray [mailto:Ray.Barker@BellSouth.com]
Sent: Friday, October 03, 2003 10:24 AM
To: ccielab@groupstudy.com
Subject: Possible NAT?
R1----OSPF----R2----OSPF----R3----No routing protocol running----R4
Do not run a routing protocol between R3 and R4; however you should be
able to ping R4 from any other router on the network.
My thought was to redistribute the connected network between R3 and R4
into ospf and then do a static nat between R3 and R4.
That did not work and I'm having trouble coming up with another
solution. Anyone have any ideas?
Thanks,
Ray
*****
"The information transmitted is intended only for the person or entity
to which it is addressed and may contain confidential, proprietary,
and/or privileged material. Any review, retransmission, dissemination
or other use of, or taking of any action in reliance upon, this
information by persons or entities other than the intended recipient is
prohibited. If you received this in error, please contact the sender
and delete the material from all computers." 113
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:56 GMT-3