Weird Symptom: can not enter (config-router)# mode in ISIS and OSPF ,why???

From: Louis Young (tonyblair@xxxxxxxxx)
Date: Mon Mar 25 2002 - 06:38:10 GMT-3

   
Dear all,
         I got the following phenomena during lab routers, it is a 2610,pls hel
p me out!

Router(config)#
Router(config)#router ospf 10
Router(config)#
00:18:17: %OSPF-4-NORTRID: OSPF process 10 cannot start. There must be at least
 one "up" IP interface, for OSPF to use as router ID
Router(config)#router isis
Router(config)#net 01.2222.2222.2222.00
                   ^
% Invalid input detected at '^' marker.

Router(config)#^Z
Router#sh ver
00:18:54: %SYS-5-CONFIG_I: Configured from console by console
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.1(10), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 06-Aug-01 23:48 by kellythw
Image text-base: 0x80008088, data-base: 0x80CD6E7C

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Router uptime is 18 minutes
System returned to ROM by reload
System image file is "flash:c2600-is-mz.121-10.bin"

cisco 2610 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of memor
y.
Processor board ID JAD05270J95 (1358695238)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Thanks in advance.

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:21 GMT-3