PIX PPTP, no NAT

From: Jim Bond (trycisco@xxxxxxxxx)
Date: Sat Oct 28 2000 - 23:00:24 GMT-3

   
Hello,

I'm trying to set up PIX PPTP without NAT but no
success. Cisco gives a sample config using NAT
http://www.cisco.com/warp/public/110/pptppix.html but
I don't understand why they use 192.168.1.0.

Here is my topology:
172.16.1.0/24(outside)---PIX---(inside)172.16.2.0/24
I create a pool 172.16.1.100-172.16.1.200, but users
from outside can't reach internal network.

Any suggestion?

Thanks in advance.

Jim

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:31 GMT-3