From: Andrew (arousch@xxxxxxxx)
Date: Sun Oct 29 2000 - 03:10:08 GMT-3
If you're setting up w/o nat why the pool? Also, you need 'NAT 0' to keep
the in/out from getting a translation.
At 07:00 PM 10/28/00 -0700, Jim Bond wrote:
>Hello,
>
>I'm trying to set up PIX PPTP without NAT but no
>success. Cisco gives a sample config using NAT
>http://www.cisco.com/warp/public/110/pptppix.html but
>I don't understand why they use 192.168.1.0.
>
>Here is my topology:
>172.16.1.0/24(outside)---PIX---(inside)172.16.2.0/24
>I create a pool 172.16.1.100-172.16.1.200, but users
>from outside can't reach internal network.
>
>Any suggestion?
>
>Thanks in advance.
>
>
>Jim
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:31 GMT-3