Re: BGP dampening parameters

Hi Iwan,

  Sure and the o/p is pasted as below

  Rack19R2#sh ip bgp dampening parameters
% dampening reconfiguration in progress for IPv4 Unicast

Thanks for spending your time on it .

Regards
Anantha Subramanian Natarajan

On Wed, Sep 23, 2009 at 4:35 AM, Iwan Hoogendoorn <iwan_at_ipexpert.com> wrote:

> Dear Antana,
>
> Can you copy the show output to this mail?
>
> --
> Regards,
>
> Iwan Hoogendoorn
> CCIE #13084 (R&S / Security / SP)
> Sr. Support Engineer  IPexpert, Inc.
> URL: http://www.IPexpert.com <http://www.ipexpert.com/>
>
>
> On Wed, Sep 23, 2009 at 6:18 AM, Anantha Subramanian Natarajan
> <anantha.natarajan_at_gravitant.com> wrote:
> > Hi All,
> >
> > Whenever I set the bgp dampening parameters under the bgp process, I
> could
> > see the parameters set by issuing the "show ip bgp dampening parameters"
> > command , but when I set the bgp dampening parameters based on a
> route-map,I
> > get this message "% dampening reconfiguration in progress for IPv4
> Unicast"
> > when issued the "show ip bgp dampening parameters".Is that a expected o/p
> > .Kindly let me know your inputs.
> >
> > Thanks for the assistance
> >
> > Regards
> > Anantha Subtramanian Natarajan
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Sep 23 2009 - 06:54:08 ART