Re: BGP dampening parameters

Hi Anantha ,

You still have this issue?

-- 
Regards,
Iwan Hoogendoorn
CCIE #13084 (R&S / Security / SP)
Sr. Support Engineer  IPexpert, Inc.
URL: http://www.IPexpert.com
On Wed, Sep 23, 2009 at 1:54 PM, Anantha Subramanian Natarajan
<anantha.natarajan_at_gravitant.com> wrote:
> Hi Iwan,
>
>   Sure and the o/p is pasted as below
>
>   Rack19R2#sh ip bgp dampening parameters
> % dampening reconfiguration in progress for IPv4 Unicast
>
> Thanks for spending your time on it .
>
> Regards
> Anantha Subramanian Natarajan
>
> On Wed, Sep 23, 2009 at 4:35 AM, Iwan Hoogendoorn <iwan_at_ipexpert.com> wrote:
>>
>> Dear Antana,
>>
>> Can you copy the show output to this mail?
>>
>> --
>> Regards,
>>
>> Iwan Hoogendoorn
>> CCIE #13084 (R&S / Security / SP)
>> Sr. Support Engineer  IPexpert, Inc.
>> URL: http://www.IPexpert.com
>>
>>
>> On Wed, Sep 23, 2009 at 6:18 AM, Anantha Subramanian Natarajan
>> <anantha.natarajan_at_gravitant.com> wrote:
>> > Hi All,
>> >
>> >  Whenever I set the bgp dampening parameters under the bgp process, I
>> > could
>> > see the parameters set by issuing the "show ip bgp dampening parameters"
>> > command , but when I set the bgp dampening parameters based on a
>> > route-map,I
>> > get this message "% dampening reconfiguration in progress for IPv4
>> > Unicast"
>> > when issued the "show ip bgp dampening parameters".Is that a expected
>> > o/p
>> > .Kindly let me know your inputs.
>> >
>> > Thanks for the assistance
>> >
>> > Regards
>> > Anantha Subtramanian Natarajan
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net