Re: Regarding FR FREEK

From: Raghav Bhargava (raghavbhargava12@gmail.com)
Date: Thu Mar 12 2009 - 00:46:34 ARST

hey em sorry all.I actually fixed it myself....:)
So basically it needs to be applied on both sides simultaneously coz
otherwise the keepalive will die after 2 events which is default for FREEK.

thanks for all the support..

raghav

On Wed, Mar 11, 2009 at 7:42 PM, Pavel Bykov <slidersv@gmail.com> wrote:

> Did you apply the same config on R1 as well?
> Including: map-class frame-relay TST12
> frame-relay end-to-end keepalive mode bidirectional
>
> ?
>
> On Thu, Mar 12, 2009 at 2:52 AM, Raghav Bhargava <
> raghavbhargava12@gmail.com> wrote:
>
>> Hi Experts,
>>
>> I enabled end-to-end keepalives on my 2 routers using FR . Also I
>> configured
>> the keepalive in bidirectional mode . As soon as I configure the class on
>> the sub-interface my PVC goes down giving me this error message
>>
>> "r1(config)#map-class frame-relay TST
>> *Mar 1 10:19:03.027: %FR_EEK-5-FAILED: Interface Serial0/0.12 - DLCI 102
>> "
>>
>> Configuration on R1
>>
>> interface Serial0/0
>> no ip address
>> encapsulation frame-relay
>> frame-relay lmi-type cisco
>> !
>> interface Serial0/0.12 point-to-point
>> ip address 150.1.12.1 255.255.255.0
>> frame-relay interface-dlci 102
>> class TST12
>> !
>> map-class frame-relay TST12
>> frame-relay end-to-end keepalive mode bidirectional
>>
>>
>> *****************************
>>
>> The weird part is my sub-interface on the other side i.e--R2 remains up
>> while the sub-interface on R1 goes down
>>
>> r1#sh ip int brief
>> Interface IP-Address OK? Method Status
>> Protocol
>> FastEthernet0/0 unassigned YES unset administratively
>> down
>> down
>> Serial0/0 unassigned YES unset up
>> up
>> *Serial0/0.12 150.1.12.1 YES manual down
>> down*
>> Serial0/0.13 150.1.13.1 YES manual up
>> up
>> Serial0/0.14 150.1.14.1 YES manual up
>> up
>> FastEthernet0/1 unassigned YES unset administratively
>> down
>> down
>> Serial0/1 unassigned YES unset administratively
>> down
>> down
>>
>>
>>
>> *****************************
>>
>> r1#sh frame-relay map
>> Serial0/0.13 (up): point-to-point dlci, dlci 103(0x67,0x1870), broadcast
>> status defined, active
>> *Serial0/0.12 (down): point-to-point dlci, dlci 102(0x66,0x1860),
>> broadcast
>> status defined, inactive*
>> Serial0/0.14 (up): point-to-point dlci, dlci 104(0x68,0x1880), broadcast
>> status defined, active
>>
>>
>> **************************************
>> r2#sh ip int brief
>> Interface IP-Address OK? Method Status
>> Protocol
>> FastEthernet0/0 unassigned YES unset administratively
>> down
>> down
>> Serial0/0 unassigned YES unset up
>> up
>> *Serial0/0.12 150.1.12.2 YES manual up
>> up
>> *
>> ******************************************
>>
>> r2#sh fram ma
>> *Serial0/0.12 (up): point-to-point dlci, dlci 201(0xC9,0x3090), broadcast
>> status defined, active
>> *
>>
>>
>> kindly advise what could be the issue ???
>>
>>
>>
>> --
>> Warm Regards
>> Raghav
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Pavel Bykov
> ----------------
> Don't forget to help stopping the braindumps, use of which reduces value of
> your certifications. Sign the petition at http://www.stopbraindumps.com/
> 

-- 
Warm Regards
Raghav

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART