Regarding FR FREEK

From: Raghav Bhargava (raghavbhargava12@gmail.com)
Date: Wed Mar 11 2009 - 23:52:37 ARST

Hi Experts,

I enabled end-to-end keepalives on my 2 routers using FR . Also I configured
the keepalive in bidirectional mode . As soon as I configure the class on
the sub-interface my PVC goes down giving me this error message

"r1(config)#map-class frame-relay TST
*Mar 1 10:19:03.027: %FR_EEK-5-FAILED: Interface Serial0/0.12 - DLCI 102
"

Configuration on R1

interface Serial0/0
no ip address
encapsulation frame-relay
frame-relay lmi-type cisco
!
interface Serial0/0.12 point-to-point
ip address 150.1.12.1 255.255.255.0
frame-relay interface-dlci 102
 class TST12
!
map-class frame-relay TST12
frame-relay end-to-end keepalive mode bidirectional

*****************************

The weird part is my sub-interface on the other side i.e--R2 remains up
while the sub-interface on R1 goes down

r1#sh ip int brief
Interface IP-Address OK? Method Status
 Protocol
FastEthernet0/0 unassigned YES unset administratively down
down
Serial0/0 unassigned YES unset up
 up
*Serial0/0.12 150.1.12.1 YES manual down
 down*
Serial0/0.13 150.1.13.1 YES manual up
 up
Serial0/0.14 150.1.14.1 YES manual up
 up
FastEthernet0/1 unassigned YES unset administratively down
down
Serial0/1 unassigned YES unset administratively down
down

*****************************

r1#sh frame-relay map
Serial0/0.13 (up): point-to-point dlci, dlci 103(0x67,0x1870), broadcast
          status defined, active
*Serial0/0.12 (down): point-to-point dlci, dlci 102(0x66,0x1860), broadcast
          status defined, inactive*
Serial0/0.14 (up): point-to-point dlci, dlci 104(0x68,0x1880), broadcast
          status defined, active

**************************************
r2#sh ip int brief
Interface IP-Address OK? Method Status
Protocol
FastEthernet0/0 unassigned YES unset administratively down
down
Serial0/0 unassigned YES unset up
up
*Serial0/0.12 150.1.12.2 YES manual up
up
*
******************************************

r2#sh fram ma
*Serial0/0.12 (up): point-to-point dlci, dlci 201(0xC9,0x3090), broadcast
          status defined, active
*

kindly advise what could be the issue ??? 

-- 
Warm Regards
Raghav

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART