From: Pavel Bykov (slidersv@gmail.com)
Date: Thu Mar 12 2009 - 00:42:58 ARST
Did you apply the same config on R1 as well?
Including: map-class frame-relay TST12
frame-relay end-to-end keepalive mode bidirectional
?
On Thu, Mar 12, 2009 at 2:52 AM, Raghav Bhargava <raghavbhargava12@gmail.com
> wrote:
> Hi Experts,
>
> I enabled end-to-end keepalives on my 2 routers using FR . Also I
> configured
> the keepalive in bidirectional mode . As soon as I configure the class on
> the sub-interface my PVC goes down giving me this error message
>
> "r1(config)#map-class frame-relay TST
> *Mar 1 10:19:03.027: %FR_EEK-5-FAILED: Interface Serial0/0.12 - DLCI 102
> "
>
> Configuration on R1
>
> interface Serial0/0
> no ip address
> encapsulation frame-relay
> frame-relay lmi-type cisco
> !
> interface Serial0/0.12 point-to-point
> ip address 150.1.12.1 255.255.255.0
> frame-relay interface-dlci 102
> class TST12
> !
> map-class frame-relay TST12
> frame-relay end-to-end keepalive mode bidirectional
>
>
> *****************************
>
> The weird part is my sub-interface on the other side i.e--R2 remains up
> while the sub-interface on R1 goes down
>
> r1#sh ip int brief
> Interface IP-Address OK? Method Status
> Protocol
> FastEthernet0/0 unassigned YES unset administratively down
> down
> Serial0/0 unassigned YES unset up
> up
> *Serial0/0.12 150.1.12.1 YES manual down
> down*
> Serial0/0.13 150.1.13.1 YES manual up
> up
> Serial0/0.14 150.1.14.1 YES manual up
> up
> FastEthernet0/1 unassigned YES unset administratively down
> down
> Serial0/1 unassigned YES unset administratively down
> down
>
>
>
> *****************************
>
> r1#sh frame-relay map
> Serial0/0.13 (up): point-to-point dlci, dlci 103(0x67,0x1870), broadcast
> status defined, active
> *Serial0/0.12 (down): point-to-point dlci, dlci 102(0x66,0x1860), broadcast
> status defined, inactive*
> Serial0/0.14 (up): point-to-point dlci, dlci 104(0x68,0x1880), broadcast
> status defined, active
>
>
> **************************************
> r2#sh ip int brief
> Interface IP-Address OK? Method Status
> Protocol
> FastEthernet0/0 unassigned YES unset administratively down
> down
> Serial0/0 unassigned YES unset up
> up
> *Serial0/0.12 150.1.12.2 YES manual up
> up
> *
> ******************************************
>
> r2#sh fram ma
> *Serial0/0.12 (up): point-to-point dlci, dlci 201(0xC9,0x3090), broadcast
> status defined, active
> *
>
>
> kindly advise what could be the issue ???
>
>
>
> --
> Warm Regards
> Raghav
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Pavel Bykov ---------------- Don't forget to help stopping the braindumps, use of which reduces value of your certifications. Sign the petition at http://www.stopbraindumps.com/Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART