OSPF over Frame-relay Task

From: Joseph Brunner (joe@affirmedsystems.com)
Date: Sun Oct 07 2007 - 02:43:43 ART


Can anyone add something to this task (I made it up). (Slevin I made this
for you, so you won't have to ask us later ;)

 

2.1 Frame-relay Configuration

     - Configure frame-relay between R2, R3 and R4 per the diagram

     - Configure frame-relay using only these device's physical interfaces.

     - Disable the use of inverse arp on these interfaces.

     - R3 & R4 will each only have 1 "frame-relay map" command

     - Do not use the "broadcast" keyword on any interface

.

 

 

3.2 OSPF Configuration over Frame-relay

     - Configure OSPF area 0 between R2, R3 and R4

     - You are not allowed to use the command "ip ospf network" on any of
these routers

     - You are not allowed to create any additional addressing for this task

     - There will not be a DR in this area.

 

 

There are several ways to solve this task; I think it's a pretty good judge
of whether or not you're ready for the CREATIVITY required to pass the lab.

 

-Joe



This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART