From: Darby Weaver (darbyweaver@yahoo.com)
Date: Sun Oct 07 2007 - 23:07:39 ART
ip ospf point-to-multipoint perhaps?
--- Gregory Gombas <ggombas@gmail.com> wrote:
> Hmmm
>
> No DR means you can't use network types NBMA or
> Broadcast.
> Can't use opsf network command means you can't
> change the network type
> to multipoint which would have been my choice.
>
> Looks like PPP over Frame Relay is the only choice
> here.
>
> What other way is there?
>
>
> On 10/7/07, Joseph Brunner <joe@affirmedsystems.com>
> wrote:
> > Can anyone add something to this task (I made it
> up). (Slevin I made this
> > for you, so you won't have to ask us later ;)
> >
> >
> >
> > 2.1 Frame-relay Configuration
> >
> > - Configure frame-relay between R2, R3 and R4
> per the diagram
> >
> > - Configure frame-relay using only these
> device's physical interfaces.
> >
> > - Disable the use of inverse arp on these
> interfaces.
> >
> > - R3 & R4 will each only have 1 "frame-relay
> map" command
> >
> > - Do not use the "broadcast" keyword on any
> interface
> >
> > .
> >
> >
> >
> >
> >
> > 3.2 OSPF Configuration over Frame-relay
> >
> > - Configure OSPF area 0 between R2, R3 and R4
> >
> > - You are not allowed to use the command "ip
> ospf network" on any of
> > these routers
> >
> > - You are not allowed to create any additional
> addressing for this task
> >
> > - There will not be a DR in this area.
> >
> >
> >
> >
> >
> > There are several ways to solve this task; I think
> it's a pretty good judge
> > of whether or not you're ready for the CREATIVITY
> required to pass the lab.
> >
> >
> >
> > -Joe
> >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART