From: Nicky (lyredhair@gmail.com)
Date: Sun Oct 07 2007 - 12:10:12 ART
Dear Jose,
You can you only neighbor command at hub, and priority 0 interface command
at all interface in hub and spoke cloud.
FR default use ospf network type Nonbroadcast, so this model support DR/BRD.
But,
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joseph Brunner
Sent: Sunday, October 07, 2007 12:44 PM
To: ccielab@groupstudy.com
Subject: OSPF over Frame-relay Task
Can anyone add something to this task (I made it up). (Slevin I made this
for you, so you won't have to ask us later ;)
2.1 Frame-relay Configuration
- Configure frame-relay between R2, R3 and R4 per the diagram
- Configure frame-relay using only these device's physical interfaces.
- Disable the use of inverse arp on these interfaces.
- R3 & R4 will each only have 1 "frame-relay map" command
- Do not use the "broadcast" keyword on any interface
.
3.2 OSPF Configuration over Frame-relay
- Configure OSPF area 0 between R2, R3 and R4
- You are not allowed to use the command "ip ospf network" on any of
these routers
- You are not allowed to create any additional addressing for this task
- There will not be a DR in this area.
There are several ways to solve this task; I think it's a pretty good judge
of whether or not you're ready for the CREATIVITY required to pass the lab.
-Joe
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART