From: Nicky (lyredhair@gmail.com)
Date: Sun Oct 07 2007 - 12:03:48 ART
Hi all,
Usually space " " after your password, your habit type "password ?" to show
any parameter after command. It's maybe.
But,
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jason Guy (jguy)
Sent: Sunday, October 07, 2007 9:31 PM
To: Grace Simon; ccielab@groupstudy.com
Subject: RE: BGP MD5 Error Message
Grace,
Make sure the password is right and make sure there is no trailing
space (i.e. " ") after the password text. The config will appear
correct, but the space is a valid character. If that is all fine, you
could try clearing the BGP neighbor. If all else fails, try what Sadiq
suggested. :)
Jason
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Grace Simon
Sent: Sunday, October 07, 2007 9:54 AM
To: ccielab@groupstudy.com
Subject: BGP MD5 Error Message
SG,
Whilst I'm having a read up on CCO has anyone else come across the
following and can shed some light on why I'm getting the following
message:
%TCP-6-BADAUTH: No MD5 digest from 140.1.14.4(23679) to 140.1.14.1(179)
My answer was the same as the solution and the Routers are peering okay.
Plus this is only being reported on one host, the other doesn't make a
peep.
Thanks,
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART