From: NITIN NITIN (ccie_study_123@yahoo.com)
Date: Sat Aug 11 2007 - 14:58:11 ART
Hi EXPERTS,
Sorry to bother again, but hope u understand exam is near
Issue I'm facing now is ----
R1 and R2 are spokes and R3 is hub
R3 virtual link is not coming up after router rebbot with R1 , it was up eralier
WITH R2 ---- VL of R3 is up
R3-------------
interface Serial2/0
ip address 152.1.123.1 255.255.255.0
encapsulation frame-relay
ip ospf priority 0
ipv6 address 2001:152:1:123::1/64
ipv6 address FE80::1 link-local
ipv6 rip RIPng enable
serial restart-delay 0
no fair-queue
frame-relay traffic-shaping
frame-relay map ipv6 FE80::2 103
frame-relay map ipv6 FE80::3 103
frame-relay map ipv6 2001:152:1:123::2 103
frame-relay map ipv6 2001:152:1:123::3 103 broadcast
frame-relay interface-dlci 103
class R1
router ospf 1
router-id 150.1.1.1
max-metric router-lsa
log-adjacency-changes
area 123 virtual-link 150.1.3.3 authentication message-digest
area 123 virtual-link 150.1.3.3 message-digest-key 1 md5 CISCO
network 150.1.1.1 0.0.0.0 area 123
network 152.1.123.1 0.0.0.0 area 123
network 152.1.125.1 0.0.0.0 area 0
distribute-list 1 in Serial2/0
R2-----
router ospf 1
router-id 150.1.2.2
log-adjacency-changes
area 123 virtual-link 150.1.3.3 authentication message-digest
area 123 virtual-link 150.1.3.3 message-digest-key 1 md5 CISCO
network 150.1.2.2 0.0.0.0 area 123
network 152.1.123.2 0.0.0.0 area 123
network 152.1.125.2 0.0.0.0 area 0
default-information originate always
distribute-list 1 in Serial2/0
!
R1----
router ospf 1
router-id 150.1.1.1
max-metric router-lsa
log-adjacency-changes
area 123 virtual-link 150.1.3.3 authentication message-digest
area 123 virtual-link 150.1.3.3 message-digest-key 1 md5 CISCO
network 150.1.1.1 0.0.0.0 area 123
network 152.1.123.1 0.0.0.0 area 123
network 152.1.125.1 0.0.0.0 area 0
distribute-list 1 in Serial2/0
ISSUE
Rack1R3# sh ip ospf virtual-links
Virtual Link OSPF_VL7 to router 150.1.2.2 is up
Run as demand circuit
DoNotAge LSA allowed.
Transit area 123, via interface Serial2/0, Cost of using 64
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:08
Adjacency State FULL (Hello suppressed)
Index 1/4, retransmission queue length 0, number of retransmission 0
First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)
Last retransmission scan length is 0, maximum is 0
Last retransmission scan time is 0 msec, maximum is 0 msec
Virtual Link OSPF_VL6 to router 150.1.1.1 is down
Run as demand circuit
DoNotAge LSA allowed.
Transit area 123, Cost of using 65535
Transmit Delay is 1 sec, State DOWN,
Timer intervals configured, Hello 10, Dead 40, Wa
Rack1R1#sh ip ospf virtual-links
Virtual Link OSPF_VL2 to router 150.1.3.3 is up
Run as demand circuit
DoNotAge LSA allowed.
Transit area 123, via interface Serial2/0, Cost of using 65535
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:04
---------------------------------
Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase.
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:10 ART