From: Ryan (ryan95842@gmail.com)
Date: Sat Aug 11 2007 - 15:08:15 ART
What the R3 config look like? Looks like you put the R1 config in twice
-Ryan
On 8/11/07, NITIN NITIN <ccie_study_123@yahoo.com> wrote:
>
> Hi EXPERTS,
>
> Sorry to bother again, but hope u understand exam is near
>
> Issue I'm facing now is ----
> R1 and R2 are spokes and R3 is hub
>
> R3 virtual link is not coming up after router rebbot with R1 , it was up
> eralier
>
>
> WITH R2 ---- VL of R3 is up
>
>
> R3-------------
>
> interface Serial2/0
> ip address 152.1.123.1 255.255.255.0
> encapsulation frame-relay
> ip ospf priority 0
> ipv6 address 2001:152:1:123::1/64
> ipv6 address FE80::1 link-local
> ipv6 rip RIPng enable
> serial restart-delay 0
> no fair-queue
> frame-relay traffic-shaping
> frame-relay map ipv6 FE80::2 103
> frame-relay map ipv6 FE80::3 103
> frame-relay map ipv6 2001:152:1:123::2 103
> frame-relay map ipv6 2001:152:1:123::3 103 broadcast
> frame-relay interface-dlci 103
> class R1
>
>
> router ospf 1
> router-id 150.1.1.1
> max-metric router-lsa
> log-adjacency-changes
> area 123 virtual-link 150.1.3.3 authentication message-digest
> area 123 virtual-link 150.1.3.3 message-digest-key 1 md5 CISCO
> network 150.1.1.1 0.0.0.0 area 123
> network 152.1.123.1 0.0.0.0 area 123
> network 152.1.125.1 0.0.0.0 area 0
> distribute-list 1 in Serial2/0
>
>
>
> R2-----
>
>
>
> router ospf 1
> router-id 150.1.2.2
> log-adjacency-changes
> area 123 virtual-link 150.1.3.3 authentication message-digest
> area 123 virtual-link 150.1.3.3 message-digest-key 1 md5 CISCO
> network 150.1.2.2 0.0.0.0 area 123
> network 152.1.123.2 0.0.0.0 area 123
> network 152.1.125.2 0.0.0.0 area 0
> default-information originate always
> distribute-list 1 in Serial2/0
> !
>
>
>
> R1----
>
>
> router ospf 1
> router-id 150.1.1.1
> max-metric router-lsa
> log-adjacency-changes
> area 123 virtual-link 150.1.3.3 authentication message-digest
> area 123 virtual-link 150.1.3.3 message-digest-key 1 md5 CISCO
> network 150.1.1.1 0.0.0.0 area 123
> network 152.1.123.1 0.0.0.0 area 123
> network 152.1.125.1 0.0.0.0 area 0
> distribute-list 1 in Serial2/0
>
>
>
> ISSUE
>
>
> Rack1R3# sh ip ospf virtual-links
> Virtual Link OSPF_VL7 to router 150.1.2.2 is up
> Run as demand circuit
> DoNotAge LSA allowed.
> Transit area 123, via interface Serial2/0, Cost of using 64
> Transmit Delay is 1 sec, State POINT_TO_POINT,
> Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
> Hello due in 00:00:08
> Adjacency State FULL (Hello suppressed)
> Index 1/4, retransmission queue length 0, number of retransmission 0
> First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)
> Last retransmission scan length is 0, maximum is 0
> Last retransmission scan time is 0 msec, maximum is 0 msec
> Virtual Link OSPF_VL6 to router 150.1.1.1 is down
> Run as demand circuit
> DoNotAge LSA allowed.
> Transit area 123, Cost of using 65535
> Transmit Delay is 1 sec, State DOWN,
> Timer intervals configured, Hello 10, Dead 40, Wa
>
>
>
> Rack1R1#sh ip ospf virtual-links
> Virtual Link OSPF_VL2 to router 150.1.3.3 is up
> Run as demand circuit
> DoNotAge LSA allowed.
> Transit area 123, via interface Serial2/0, Cost of using 65535
> Transmit Delay is 1 sec, State POINT_TO_POINT,
> Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
> Hello due in 00:00:04
>
>
>
>
>
> ---------------------------------
> Looking for a deal? Find great prices on flights and hotels with Yahoo!
> FareChase.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:10 ART