From: Primetek_Easyman (easyman@primetek.com.tw)
Date: Sun Nov 27 2005 - 22:02:02 GMT-3
Dear Group Study gurus:
I have a question about secondary address issue in eigrp.
Is it possible to forming adjacency from different primary network addresses
on two routers?
This is an imaginary scenario.
Say two routers -- R1 and R2
R1(e0/0) -----------------(e0/0)R2
R1
Interface e0/0
Ip address 1.1.1.1 255.255.255.0
Ip address 1.1.2.1 255.255.255.0 secondary
Router eigrp 1
Network 1.0.0.0
R2
Interface e0/0
Ip address 1.1.2.2 255.255.255.0
Router eigrp 1
Network 1.0.0.0
In rip world we have an option called "no validate-update-source" to conquer
this restriction.
But after searching the CCO I could not find the equivalent as above in
eigrp world.
Can we still have the adjacency forming up without change the primary or
secondary address?
Thanks
Lin
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:08 GMT-3