From: Eddie Parra (eddie.parra@gmail.com)
Date: Sun Nov 27 2005 - 22:35:05 GMT-3
No. You will get a "not on common subnet" error.
-Eddie
On 11/27/05, Primetek_Easyman <easyman@primetek.com.tw> wrote:
> Dear Group Study gurus:
>
> I have a question about secondary address issue in eigrp.
> Is it possible to forming adjacency from different primary network addresses
> on two routers?
> This is an imaginary scenario.
> Say two routers -- R1 and R2
>
> R1(e0/0) -----------------(e0/0)R2
>
> R1
> Interface e0/0
> Ip address 1.1.1.1 255.255.255.0
> Ip address 1.1.2.1 255.255.255.0 secondary
> Router eigrp 1
> Network 1.0.0.0
>
> R2
> Interface e0/0
> Ip address 1.1.2.2 255.255.255.0
> Router eigrp 1
> Network 1.0.0.0
>
> In rip world we have an option called "no validate-update-source" to conquer
> this restriction.
> But after searching the CCO I could not find the equivalent as above in
> eigrp world.
>
> Can we still have the adjacency forming up without change the primary or
> secondary address?
>
> Thanks
>
> Lin
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:08 GMT-3