From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Sun Oct 09 2005 - 10:40:57 GMT-3
The reflector Port is used to take ASIC, try using another port as
reflector, also vlan 100 must exist in both sides..
HTH
Victor
nhqky888@ybb.ne.jp wrote:
>Hi all,
>
>After RSPAN reflector port is applied on trunk port,
>the trunk on that port becomes down state.
>
>
>Rack05SW1;
>
>interface FastEthernet0/24
> switchport trunk encapsulation isl
> switchport trunk allowed vlan 10,12,100
> switchport mode trunk
> switchport nonegotiate
>
>monitor session 1 source interface Fa0/2
>monitor session 1 destination remote vlan 100 reflector-port Fa0/24
>
>
>Rack05SW1#sh vlan
>
>Remote SPAN VLANs
>------------------------------------------
>100
>
>
>
>Rack05SW2;
>
>interface FastEthernet0/24
> switchport trunk encapsulation isl
> switchport trunk allowed vlan 10,12,100
> switchport mode trunk
> switchport nonegotiate
>
>monitor session 1 destination interface Fa0/10
>monitor session 1 source remote vlan 100
>
>
>Rack05SW2#sh vlan
>
>Remote SPAN VLANs
>------------------------------------------
>100
>
>
>
>Please give any suggestion to me.
>
>
>
>Thanks,
>
>
>KY
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:50 GMT-3