From: B Kim (beokim@comcast.net)
Date: Mon Jul 25 2005 - 22:59:52 GMT-3
Hi
I think PPPoA configured by Dialer interface on end and by the
Virtual-Template on the other end should work. But it doesn't in my lab
work.
Is it supposed to work or what is wrong with the configuration?
Any comment would be appreciated. Thanks.
R1:
!
interface ATM3/0
no ip address
no atm ilmi-keepalive
pvc 0/101
encapsulation aal5snap
protocol ppp dialer
dialer pool-member 1
!
!
interface Dialer1
ip address 10.1.12.1 255.255.255.0
encapsulation ppp
dialer pool 1
!
R2:
!
interface ATM3/0
no ip address
no atm ilmi-keepalive
pvc 0/101
encapsulation aal5snap
protocol ppp Virtual-Template1
!
!
interface Virtual-Template1
ip address 10.1.12.2 255.255.255.0
!
P.S.
When I configured the same type either Dialer or Virtual-Template on
both sides, then it works.
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:31 GMT-3